Coming from the seal between the engine oil casing and the transmissions casing.
do you mean from here (red circled)? If yes it could also be engine oil as mentioned above. I had some in this area coming from back side of valve cover.
Not from where you indicated. On the seal between the gearbox casing and the engine casing. I am still struggling to bleed the hydraulic clutch and when I am pumping the clutch to push hydraulic fluid through the nipple on the slave cylinder(trying to eliminate air in the line) the drip increases. Any help with the bleeding would also be appreciated as I've tried numerous methods and still have no clutch. Replaced seals on master cylinder piston as I thought the fault may lie there but no luck so far. Could it be the slave cylinder causing the problem? Thanks for the help so far.
Eh ?? Your transfer box is a full gear box and bell housing away from your engine
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
