Transfer leaver jumping int neutral

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

lordsymon

Member
Posts
12
Hello Everyone
I had a problem with my series 2a. Transfer leaver jumping in to neutral.
Managed to fix with a 50pence spring and an elastic band. Part number for spring was 243714
DSC_1017.JPG
DSC_1029.JPG
DSC_1030.JPG
 
Last edited:
Best check the detent ball and spring are in place, also selector fork is not loose on shaft .
Is the bracket for high low lever fitted to correct side of alloy casing at lower end ie where it bolts to gearbox.
 
Back
Top