Transfer box replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Landyfox

Landyfox

Well-Known Member
Posts
4,489
Location
North East - England (Centre of the Universe)
This bloody transfer box caper continues...

Can someone please confirm that when replacing the transfer box whether you need to use a gasket or some sort of seal between the main gearbox and transfer box.?! Originally I was informed that no seal/gasket was required, however when removing the existing box a gasket appears to have been used. I'm not sure now :(
 
Landyfox said:
This bloody transfer box caper continues...

Can someone please confirm that when replacing the transfer box whether you need to use a gasket or some sort of seal between the main gearbox and transfer box.?! Originally I was informed that no seal/gasket was required, however when removing the existing box a gasket appears to have been used. I'm not sure now :(
Click to expand...

nothing at all they arent supposed to be sealed together ,each has its own seal and there is a recess in rear of gearbox so that if either leaks oils can run out of between them rather than migrating into other box
 
You must log in or register to reply here.

Similar threads

C
Oily transmission drum brake, transfer case drain mod.
Replies
17
Views
1K
boguing
boguing
P
Transfer Box oil seals - are they the same on both sides of the case? - Puma 90 2.4
Replies
3
Views
933
Puma_Boy
P
L
LR 90 Engine to flywheel housing gasket?
Replies
2
Views
623
lasher99
L
AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
563
AH-4x4
AH-4x4
P
Is it always like this ?
Replies
7
Views
269
Kev12
Kev12
Back
Top