Transfer box / gearbox fill
- Thread starter smartrwj
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
I've tried 2 different versions based on a 500ml syringe.
With the first one I fill it manually ie by removing the top and filling up by hand, then replace the top and squirt it in.
Oil Suction Gun
The 2nd one has a non-return valve built in and 2 pipes. This allows you to suck the fluid out of the can, then squirt it into the car.
Heavy-Duty Dual Transfer Pump
The 2nd one should be better but honestly I find it's not due to the effort required to suck the fuel up.
Dave
- Posts
- 5,516
- Location
- Surrey / Hants border
Has anyone got an opinion on the garden sprayer type pumps? I've got one on order as it was suggested on here somewhere that they were good for filling the gearbox (auto, in my case).
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
I tried one once with both atf and EP oils. The atf seems to be ok-ish but the EP oil just seemed to be too thick.
I'm sure this would eat the job, but at over £100 takes a bit of justifying unless you're using it every day:
http://www.paddockspares.com/transmission-filling-system.html
Dave
Last edited:
Cheers guys bought a grease gun shape oil transfer pump but diff oil was too thick to go through .like a right tit I didn't try it first and had drained the box down before I realised this .duh .... Will be a wee bit more prepared before I takle the gearbox oil .. Many thanks
cambridgecockney
Active Member
- Posts
- 714
I use a length of hose through the engine bay.put end in filler hole,use funnel in tother end.measure out what you need and pour in through funnel.never over filled or spilt.
waynejobe
New Member
- Posts
- 4
- Location
- Portsmouth
porkbeer
New Member
- Posts
- 57
- Location
- North Devon
genius
porkbeer
New Member
- Posts
- 57
- Location
- North Devon
genius
Disco DJ
Active Member
- Posts
- 239
- Location
- New Forest, Hampshire
I use a normal pump action garden sprayer. The oils are a bit thick for it so it only trickles. Takes ages but was cheap and did the job
this sort of thing;
http://www.amazon.co.uk/Hozelock-5L-Standard-Garden-Sprayer/dp/B006L6M7FS
this sort of thing;
http://www.amazon.co.uk/Hozelock-5L-Standard-Garden-Sprayer/dp/B006L6M7FS
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
I use a pump for outboard motor gearbox filling. You can pick one up at any boat place.
Cheers gonna give this ago asp
I use an old hand priming bulb and hose for outboard engines. Which I had lying around among my boat bits. Does the job perfectly albeit taking a bit of time....5 mins or so. Obv make sure if you can get one that its well flushed with oil first to remove any traces of fuel if its used. Even new ones can be bought relatively cheap.
