Disco 1 tracking.

So i had to change the track bar out for a spare i had, as i managed to snag a lifting strap on the end of it and bent it completly.
Adjusted it as close as i could to the old one, but does pull to the right now. (Fine before)

Is toe out the only thing to set on the track bar? So a measurment from the front and back of the center of the rim , loosen the two clamps on the adjusting part and set it to 2mm longer on the front?

Or is there more to it than this ..

I run mine at zero degrees ti/to, have you checked rave for the right settings?

Yeah it says 0-2mm

I've got nowhere flat to do it myself,
should be good to just print this out and give it to a garage right?
Everyone local to me said no when i asked if they could track it before.