Track rod end/ball joint question

Hi all i have a quick question with regards to replacing the track rod end- ball joint and that is today i picked up the bits i needed to replace my track rod ends and my crossrod end. now the question is do i need two left hand or two right hand ball joint assemblys, as i have been given two right hand and one left. The landy is a right hand drive many thanks in advance.
Buster

One left and one right , that way you can adjust the tracking . be a bit ****e to try and track up if there was 2 rights or 2 lefts lol

befor you take em off , messure the length of the rod from the centres ( underside of the joints ) of the ball joints so when you fit your new ones it will be roughly the same as befor . but you need to get it tracked up to be spot on after tho tbh .

Sorry i meant to say that ill be replacing the cross rod end ball joint as well as both track rod ends.
many thanks
buster

spurs said:

Sorry i meant to say that ill be replacing the cross rod end ball joint as well as both track rod ends.
many thanks
buster

Click to expand...

well track rods are one LHT on one RHT ( as you know , just looked on Microcat as i couldnt remember ) and its stating the cross rod ( tie bar/drag link ) is RHT .

So what youve bought is correct .

Oh brilliant i thought i had the wrong stuff, many thanks for the quick replys that is brilliant.
THANK YOU
Buster

spurs said:

Oh brilliant i thought i had the wrong stuff, many thanks for the quick replys that is brilliant.
THANK YOU
Buster

Click to expand...

no probs mate we are all here to help each other out ( or most cases take the **** lol ) .

Aye as said above. Ah've done a How To on the drag link ball joint if it's any use tae ye...

http://www.landyzone.co.uk/lz/f41/drag-link-ball-joint-renewal-82152.html