Beast o Bodmin
Banned
- Posts
- 17,157
strop is best.rope gets mingeing.
from a complete novices point of veiw why didn't you pull him out backwards, the way he went in?, my thinking being if he went in that way it's possibley easier to get out that way too
my thinking being if he went in that way it's possibley easier to get out that way too
An obvious point often missed by the most experienced off roader.
As for the original question.....get a good quality fibre rope that is about as thick as your index and middle finger together......not what Halfords would call Heavy Duty either.
A KERR is a useful tool in the right hands. Does need proper tow points and both parties need to know what they are doing. Their use is a bit of an art and most accidents that I have seen are due to apes thinking that they are a cure-all slide hammer. Learn 'dead' recovery first.
A good place to start would be here DIFFLOCK.com - Driving Techniques
i had a 24mm rope but the fooker used to get damaged to easy i have switched to strops as they are easier to store and don't get damaged as quick (in my experience)
I use both and never had any problems. Slow and steady works for me. Strops are only a problem if the recovery driver is a twot.
i hope they is cast jate rings ratty!
I use mainly strops for offroading. I carry strops that vary from 12ft to 75ft in length and rated at between 2.5ton and 15ton. I also carry a chain bridle and 1x20ft chain and 2x 12ft chains. I have 3 winch cables (1x120ft, 1x75ft and 1x50ft) which I can also use if needs be. (I usually keep these on board my truck unless I know I'm gonna need them). They're dead handy for when you need to pull a vehicle from around bends. I have 4 snatch blocks so can negotiate several bends in one hit. I also carry 50ft of 24mm rope and 2 grapling hooks (for fishing for vehicles underwater).
I also carry a kenetic rope but have never had the need to use it yet.
For emergency use I also carry 2 jate rings onboard. If people get stuck and don't have a decent recovery point they can easily be fitted and removed again after the recovery.
Bloody ell are you a timelord, that much gear you must be driving the Tardis
The set I carry in my truck are cast. The ones I keep in the back of my landy are welded. When I find another set of cast ones at the right price I'll have em. I also carry a set of rear crossmember lifting rings but again they are for emergency use and haven't had to use em yet (and wouldn't really like to unless I have no other choice). I also carry a spare drop hitch too.
lets just say that there generally aint a lot of room in the back of my landy.
I haven't even started on the tools, fuel, oil, spare track arms and other spare parts, trolley jack, bottle jack, hi-lift, diagnostics computer, etc etc
Is it fair to say that your not an optimist, Ratty
you would have 50 fits if you saw the manky old strop that the garage i used to work for use to recover cars and vans from ditches........
i refused to use it wheni went out to pull a lwb transit out of a ditch.... i also refused to use the works vauxhall truck so i took me landy.... everyone said that it would need a lorry with a hiab i had it out within 2 mins
Is it fair to say that your not an optimist, Ratty
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!