Tow bar on an older 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

basicbluesjones

Member
Posts
38
Hi on my old 110 i have large general tyres,so much so that the height of the vehicle is much higher,i have a drop plate to put on but its still going to be too high to connect to a trailer,apart from the obvious answer-put smaller tyres on- is there anything else i can do to connect the trailer -caravan to the truck? Thank you,jones
 
Is this you ?

monster.jpg
 
Definitly need more information regarding what tyres for a towbar height and what trailer you are trying to tow that needs such a low hitch. And maybe a picture of your current setup. After that will be better placed to give advice. My towbar is a combination of the earlier upper tow plate and the later style for the lower. This gives a slightly lower than standard but not by much. If you go too low it acts as a plough as soon as you venture off tarmac.
 
I have a old mk1 renault master pickup and it just has a massive drop plate to bring the ball back down for low trailers.

Trying to imagine the scenario when a 10 hole drop plate isn't going to be enough to get the towbar at the right height and cant come up with one...
 
I have an old 110. Mine is on 235/85 16 tyres and has a Dixon Bate adjustable height tow hitch. I still needed a drop plate to tow a car transporter trailer.

Without you giving us actual tyre sizes or something real world to work off no-one can really help. Try measuring the height above the ground of the bottom of the rear crossmember. That and read the actual tyre sizes off the sides of the tyres. Also a photo of the towbar setup you have would help.
 
Grebby said:
I have an old 110. Mine is on 235/85 16 tyres and has a Dixon Bate adjustable height tow hitch. I still needed a drop plate to tow a car transporter trailer.
Click to expand...

I repeat we need more information and photos of your vehicle, setup, and currernt towbar and also of the trailer you are trying to tow because it is so variable. As above needed a drop plate for his car trailer whereas I have a 110 hardtop with 265/75/16 BFG tyres and with my setup could tow car trailer with no issues. And my towball is not even on the lowest setting:


1714482546371.png


1714482695249.png
 
basicbluesjones said:
no not that big
but generally, i want to tow with my 110,so how do i get around that? is there a way?
Click to expand...

basicbluesjones said:
i know about drop plates but i havent seen anything with enough drop
Click to expand...

basicbluesjones said:
i have giant tyres so i just want to see if i can tow anything with the existing setup
Click to expand...

No such thing as not enough drop, someone just hasn't looked hard enough. Regardless of how ridiculously "giant" your tyres are you can get a drop plate to tow. although if they are that giant and you want to tow with it I would advocate for retuning to stock otherwise it will not tow very well.

Screenshot 2024-04-30 161620.png
 
You must log in or register to reply here.

Similar threads

P
Wiring for Tow Bar
Replies
1
Views
145
Nodge68
Nodge68
L
Tow hitch height versus horse box issue (Defender 110 2011)
Replies
16
Views
2K
Wagon Loon
Wagon Loon
MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
1K
miktdish
miktdish
R
New member
Replies
7
Views
1K
Hippo
Hippo
Datatek
P38 swan neck tow hitch.
2
Replies
25
Views
2K
Rubberknees
Rubberknees
Back
Top