Torque for 200tdi

Obi_110 · Aug 16, 2023

Afternoon,

I only have a defender haynes manual, but have a disco 200tdi in my 110 - are the torque settings the same for the disco 200tdi? Or if they're different, please can someone advise.

Also, any recommendations on gauges to measure the 60 degree turn after ft/l, I have a cheapy from amazon that I used on a friend's 300tdi, but I wasn't 100% convinced with it

Thanks again

Hicap phill · Aug 16, 2023

I think the head torque setting would be the same between LR & disco. Engines are the same except the turbos mounting.

@resto_d1 I know your doing some disco engine works, you got any figure for the bolts?
Thanks

resto_d1 · Aug 16, 2023

What are we talking? Headbolts? Laser do a good dial gauge attachment. You want a stubby socket for the back right bolt (if we talking headbolts) as you can’t fit an impact in

Flossie · Aug 16, 2023

Rotate 1 flat of the head of the bolt =60 degs.

Obi_110 · Aug 17, 2023

Hicap phill said:
I think the head torque setting would be the same between LR & disco. Engines are the same except the turbos mounting.

@resto_d1 I know your doing some disco engine works, you got any figure for the bolts?
Thanks

resto_d1 said:
What are we talking? Headbolts? Laser do a good dial gauge attachment. You want a stubby socket for the back right bolt (if we talking headbolts) as you can’t fit an impact in

Sorry, should have specified, yes the head bolts - thanks I'll take a look at laser

resto_d1 · Aug 17, 2023

It’ll be same but I can check if you like

Torque for 200tdi

Obi_110

Active Member

Hicap phill

Well-Known Member

resto_d1

Well-Known Member

Flossie

Well-Known Member

Obi_110

Active Member

resto_d1

Well-Known Member

Similar threads