Jasonmichael
Well-Known Member
- Posts
- 258
- Location
- Oldham
Shoot me now think I've done sommat wrong somewhere??? Just before sealing it up & putting it back in I thought 'I'll give it just that one more once over'
Everything seemed fine, was very smooth going from low to high, diff lock on, diff lock off..... Then I just happened to turn the flanges in the opposite direction and it felt really notchy and a little stiff to turn against each other What have I done wrong??? I'm sure I set all the preloads as per the rebuild manual and used the correct shims etc. for the centre diff. I've checked & treble checked and cannot work out why its so notchy????
Any thoughts would be greatly appreciated...
See vid below
Everything seemed fine, was very smooth going from low to high, diff lock on, diff lock off..... Then I just happened to turn the flanges in the opposite direction and it felt really notchy and a little stiff to turn against each other What have I done wrong??? I'm sure I set all the preloads as per the rebuild manual and used the correct shims etc. for the centre diff. I've checked & treble checked and cannot work out why its so notchy????
Any thoughts would be greatly appreciated...
See vid below