Thermostat.

Gofish · Mar 20, 2007

Is this where my thermostat lives? (2.5 N/A)

Got a new one to pop in, and I'm going to change the coolant at the same time.

What's the ratio of water to coolant in this engine?

Thanks

The Mad Hat Man · Mar 20, 2007

normally tells yu on the anti-freeze can - try 50/50 to start with - diff ratios give different freezing levels.

Jason2 · Mar 20, 2007

Gofish said:
Is this where my thermostat lives? (2.5 N/A)

Got a new one to pop in, and I'm going to change the coolant at the same time.

What's the ratio of water to coolant in this engine?

Thanks

THAT IS NOT WHERE YOUR THERMOSTAT LIVES!!!!!!

It's a cover to get to the injection timing,You will find what you are looking for at the front of the rocker cover to the left!!!!!

As for anti-freeze, just buy ready mixed coolant and bang that straight in.

Gofish · Mar 20, 2007

Thanks.

GRUNT · Mar 20, 2007

We harped on about coolant mixes a bit back, I think the out come was to bung the whole container in and top up with water.

Griffdowg · Mar 20, 2007

yer, just get hold of 4litres and top up with water. should yield a 33.33% mix... which is enough

]

G

Bradj999 · Mar 21, 2007

Gofish get yerself a Haynes book of lies, don't worry about the writing the pictures will point you in the right direction and it will have all the fluid capacities in there for you. Hopefully you won't start taking bits off that you don't need to.

Gofish · Mar 21, 2007

Thanks for the help..

I know what I'm doing now...

I think that where the problem lies.. I got myself a Haynes manual, and as with others I've brought in the past, never find them that usefull.

Thermostat.

Gofish

New Member

The Mad Hat Man

Well-Known Member

Jason2

Well-Known Member

Gofish

New Member

GRUNT

Well-Known Member

Griffdowg

New Member

Bradj999

New Member

Gofish

New Member

Similar threads