Thermostat and fuel injectors

rugbynut129

Member

Posts

83

• Jun 14, 2020

• #1

So im reassembling my 2.5 N/a and whilst putting the thermostat back together i found that the thermostat itself has room to move within its housing and this isnt something i noticed when i took it apart, that was 3 years ago mind.

Secondly whilst putting the injectors back in they dont seem to be able to fit correctly, something seems to be stopping the injectors from going all the way in on all 4 injectors? also does the 2.5 NA have the same injectors as the 2.5TD?

thanks,

Dave.

 

Last edited: Jun 14, 2020

steve2286w

Well-Known Member

Posts

4,523

Location

monkeyangerland

• Jun 20, 2020

• #2

Have you managed to sort this , the injectors look the same
Are the washers in properly , injectors cleaned and bores clean

 

Attachments

• 
  933E04ED-C60E-493F-8CDB-C5BCF51A31B1.png

  110.2 KB · Views: 192

Huddy84

Well-Known Member

Posts

746

Location

East Anglia

• Jun 20, 2020

• #3

Make sure both old washers are off the injector and there aren’t any old washers in the head. Not sure what you mean about the thermostat but unless it’s been sat in the sun I’d of thought it’d be closed/sealed

 

Blackburn

Well-Known Member

Posts

3,105

Location

Tyneside

• Jun 21, 2020

• #4

Have you got the correct thermostat?
Drawing does not show any extra rubber seals.

 

Attachments

• 
  2.5 thermostat.JPG

  47.9 KB · Views: 200

rugbynut129

Member

Posts

83

• Jun 27, 2020

• #5

Blackburn said:

Have you got the correct thermostat?
Drawing does not show any extra rubber seals.

Click to expand...

its what has been in it for the 10 years ive owned it so i was assuming so