Testing if 4WD still works!?

kempy100 · Jan 16, 2014

Morning all,

Just brought a 53 plate 1.8 Freelander. All works fine as far as I can see except the HDC button doesnt seem to light on the dash? read the other threads regarding fault finding this so will tackle that first. However I am unsure on how to test if the 4WD system is still in operation? is this the same as testing the VCU? any help would be welcome! Thanks.

JRNORWAY · Jan 16, 2014

HDC button problem is most likely a wire(or both as on mine) that is broken under the gear gaitor. See: http://www.landyzone.co.uk/lz/f69/how-hdc-hill-decent-control-repair-175880.html

SnowmanV8 · Jan 16, 2014

A good test is to park on wet grass and pull away hard if the front wheel's spin without the rear kicking in to pull you forward.

kempy100 · Jan 16, 2014

Thanks for the quick response guys! appreciate the advice.

rossymtb · Jan 16, 2014

Did you check if it still has its propshaft also? I found when looking for one a lot of stealers don't tell you its no longer 4wd

Testing if 4WD still works!?

kempy100

New Member

JRNORWAY

Active Member

SnowmanV8

Well-Known Member

kempy100

New Member

rossymtb

New Member

Similar threads