KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
52 plate td6 (not jag tdv6) 3.0
td6 Injectors
- Thread starter KernowSam
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
the boy did good 
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
Range Rover l322 model
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
see the m57n version of the engine was nearly 300 BHP... wonder what can be done to get ours back to that
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
christ... we would be changing our gearboxes more often than our underwear!
I would have thought- different injectors, obviously an ecu remap, uprated turbo and intercooler- what about a bolt on supercharger
I would have thought- different injectors, obviously an ecu remap, uprated turbo and intercooler- what about a bolt on supercharger
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
christ... we would be changing our gearboxes more often than our underwear!
I would have thought- different injectors, obviously an ecu remap, uprated turbo and intercooler- what about a bolt on supercharger
haha who cares !
got the remap.... it works wonders
the gearbox loves it, holds gears for longer = less gear changes
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
I'm getting one of those soon- could do with a bit more power, what with all the hills round here.
On the modding point- I am pretty sure years ago a mate of my dads had a 3.0 diesel 5 series which had been heavily modded- with something like 350hp. God knows what had been done to it.
My merc with the infamous om606 diesel can be modded to 450 bhp- and then stuck in a Volvo-
Volvo 740 Turbo Diesel OM606 Burnout - YouTube
At a tesco near you...
On the modding point- I am pretty sure years ago a mate of my dads had a 3.0 diesel 5 series which had been heavily modded- with something like 350hp. God knows what had been done to it.
My merc with the infamous om606 diesel can be modded to 450 bhp- and then stuck in a Volvo-
Volvo 740 Turbo Diesel OM606 Burnout - YouTube
At a tesco near you...
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
dove
Active Member
- Posts
- 393
- Location
- Fife,scotland
Td6 injectors are not coded to ecu,do a leak off test ,post the results ,does it turn over more than usual to fire it up?changed loads of these .like previously said check both electric pumps are working,in tank and inline one.
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
fires up straight away, no hesitation- just lumpy. Months back it was a little lumpy so I put some Forte diesel treatment in and it was a lot better.
What size tubing do I need? or should I buy a leak off test kit?
What size tubing do I need? or should I buy a leak off test kit?
dove
Active Member
- Posts
- 393
- Location
- Fife,scotland
You get Sealey leak off test kit for around 40 quid on eBay does 6 cylinders,or can make your own but will have to source the push in ends that hold leak off pipes to injector, don't want to start messing with your original pipes if you don't have too,always a handy tool to have lying around,
Kernowsam
Spoke to Friend from maccalister fuel systems today td6 injectors are not coded however they can be coded for optimum fuel efficiency friend says he has change single injectors in them a dozen times with no problem. A asked a price to get them over hauled and there are 120£ a piece hope that's some help to you
Spoke to Friend from maccalister fuel systems today td6 injectors are not coded however they can be coded for optimum fuel efficiency friend says he has change single injectors in them a dozen times with no problem. A asked a price to get them over hauled and there are 120£ a piece hope that's some help to you
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
Thanks yes that is helpful! Took all the covers off today, changed air filter, fuel filter and thoroughly cleaned EGR valve- was pretty coked up. Took a nosey at the crankcase breather filter, not very dirty but will replace it with the cyclone variety at some point.
Tried upclipping the injector cables one at a time with the engine running to see if there was any difference. Couldn't really be sure- I think a leak off test is needed. Cheapest I can find a kit is about £100!
Tried upclipping the injector cables one at a time with the engine running to see if there was any difference. Couldn't really be sure- I think a leak off test is needed. Cheapest I can find a kit is about £100!
dove
Active Member
- Posts
- 393
- Location
- Fife,scotland
Check out eBay item number
261106551196 Sealey £44 inc delivery
261106551196 Sealey £44 inc delivery
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Get rid of that EGR all together and fit a bypass
Engine runs much better once bypassed
KernowSam
New Member
- Posts
- 221
- Location
- St Ives, Cornwall
Thanks Dove- will buy that now.
Ellis- don't get this started again- we will be here all night!
My EGR is as clean as a whistle now- but will consider blanking it in the future. How much is a blanking kit?
Ellis- don't get this started again- we will be here all night!
My EGR is as clean as a whistle now- but will consider blanking it in the future. How much is a blanking kit?
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
haha im only trying to help !
suit yourself :lalala:
(ps, there about £30)
the freelander td4 one fits fine
do you really want that soot being sucked into your engine ?
