TD5 - Turbo Oil Drain Pipe Bolts

Tom591 · Feb 25, 2019

Does anyone have the part number for the 2 bolts that hold the oil drain pipe to the underside of the turbo?

The heads are starting to get a bit rounded on mine, and I'd like to replace them.

Also, what is the likelihood of stripping the threads in the block if I replace the whole turbo oil drain pipe? I see it screws directly in to the engine, is it best to leave well alone?

Thanks in advance.

joojar · Feb 25, 2019

Replaced my pipe, no particular problems at the bottom end assuming you can lay hands on crows foot spanner or similar.

Old thread on same topic: https://www.landyzone.co.uk/land-rover/turbo-oil-drain-pipe-leak.318732

Tom591 · Feb 26, 2019

Thanks joojar.

That topic answers my questions regarding the pipe, but I still can't see any mention of the part number for the bolts.

sierrafery · Feb 26, 2019

Those bolts are not listed at all in microcat so you'll have to remove them and buy based on measurement.... my guess is that it's M8 x 1.25

TD5 - Turbo Oil Drain Pipe Bolts

Tom591

Member

joojar

Active Member

Tom591

Member

sierrafery

Well-Known Member

Similar threads