Junder
New Member
- Posts
- 122
Seems like my fuel pressure regulator is away just wondering if anybody has uses a TD5 Fuel Pressure Regulator Repair Kit and was it worth while or is it best just to buy a new one?
TD5 Fuel Pressure Regulator Repair Kit
- Thread starter Junder
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sparky steve
Active Member
- Posts
- 226
- Location
- chester
didn't know you could get a repair kit
but seems best to just get a new one, pain to fit let alone trying to repair it too
Junder
New Member
- Posts
- 122
didn't know you could get a repair kit
but seems best to just get a new one, pain to fit let alone trying to repair it too
The difference is you can get the repair kits on eBay for a £10 while a second hand fuel pressure regulator us £40 + also cause I live in northern Ireland the post and packaging can be a litte excessive sometimes
sparky steve
Active Member
- Posts
- 226
- Location
- chester
oh yeah
sod that just get a new unit, yes costs alot more but so mch easier to fit
and you'll be sure it works first time.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
that is indeed what i normally find ,you can feel if hole on rear is dripping diesel
austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
i tried the repair kit and it still leaked, although i have seen other people fit them with success. ended up buying a new regulator from LR as with the 15% discount you can hagg;e from them they aRE CHEAPER THAN SH*TPART ONES
My first post... recently replaced the fuel regulator on my 04 TD5 disco using a service kit available from ebay, LAND ROVER DISCOVERY 2 / DEFENDER TD5 FUEL PRESSURE REGULATOR REBUILD KIT | eBay this kit includes the regulator unit, gaskets and 'O' rings for both types of regulator casting. Cost 39 quid and worked a treat. big saving over a new unit at about 125. Not much extra work as the hard bit is getting the regulator housing off/on. Once off, getting the old regulator out of the housing is just a case of removing a circlip.
