TD5 fuel filler size.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
retneprac

retneprac

Well-Known Member
Posts
2,034
Location
Bedfordshire
I'm introducing a small section of metal tube into the fuel filler rubber neck to allow me to connect a fuel feed to my cabin heater, is there an easy way to check what the rubber neck's diameter should be? its a bit out of shape so not easy to measure in-situ. Its a 2004 TD5 110.

Cheers for any advice.
 
retneprac said:
I'm introducing a small section of metal tube into the fuel filler rubber neck to allow me to connect a fuel feed to my cabin heater, is there an easy way to check what the rubber neck's diameter should be? its a bit out of shape so not easy to measure in-situ. Its a 2004 TD5 110.

Cheers for any advice.
Click to expand...

If you can wait until the morning, I will measure mine for you?
 
As far as I am aware the 110 has only had one size of fuel filler and that is 60mm.

90 have had two two sizes. TD5 and Early TDCi were 50mm up to vin 8A. Later 90 TDCi from vin 8A they are 60 mm


HTH


Brendan
 
retneprac said:
Great Mick, mine is oval @55mm x 78mm, think it should be 60 or 70mm dia.
Click to expand...

Just measured mine. The OD of the fuel filler is 60mm. The ID of the filler to tank hose is 58mm. These are taken with a steel rule, so can’t be any more precise than that, sorry.
 
You must log in or register to reply here.

Similar threads

2
Early 90 fuel filler neck and hose
Replies
1
Views
590
johnlad
johnlad
E
Disco 2 Fuel Leak
Replies
1
Views
160
Landmark2
Landmark2
mad85
Disco 2 TD5 Low Fuel pressure!!
2
Replies
22
Views
689
mad85
mad85
dev742
Disco II TD5 Turbo flange nuts
Replies
14
Views
443
Stanleysteamer
Stanleysteamer
tankduck
Fuel pressure.....stalling
Replies
5
Views
1K
tankduck
tankduck
Back
Top