Evan farmer
Active Member
- Posts
- 782
My td5 has a make do pipe going to the egr cooler around top of engine which obstructs access and engine cover has to be off if i was to put a 2p at each end of egr cooler could i just disconnect pipe
Td5 egr cooler pipe blanking
- Thread starter Evan farmer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Evan farmer
Active Member
- Posts
- 782
Bump
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
You on about the coolant pipes? I used a bolt and jubilee clips
As for the cooler itself mines off totally.
Can post pics if needed
As for the cooler itself mines off totally.
Can post pics if needed
Evan farmer
Active Member
- Posts
- 782
Yes please pics would be helpful
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
I thought i coul get some though all mines buries behind pipe work etc...
The cooler can be blanked off at each end and left insitu if you like or you can remove the cooler totally and bung the coolant pipes.
The cooler can be blanked off at each end and left insitu if you like or you can remove the cooler totally and bung the coolant pipes.
Evan farmer
Active Member
- Posts
- 782
I want to blank it as it will still pass mot with it removed but the pipe on the cooler is a different style and obstructs acces
ozzyboydeano
Well-Known Member
- Posts
- 843
yes these cooling lines can be plugged up ...thats providing your EGR isnt active
