adaptorman
New Member
- Posts
- 143
Hi all bit issuise .when i accel.. or de accel i feel a lunck .is it normal with a auto td5 ? I carnt see anything lose .ie propshafts cjs bolts etc .anything to worrry about
td5 discovery 2 auto .cluncking noise
- Thread starter adaptorman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
Worn propshaft UJs is my guess.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
A Frame ball joint?
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
Its possible
ifloochies
Well-Known Member
- Posts
- 866
The discovery 2 does not employ the A frame as used in the discovery 1. My guess is worn rear prop donut bush or worn radius arm bushes.
adaptorman
New Member
- Posts
- 143
never found fault tbh , only thing I found was something called a wot linkage worn , after replaceing them the rumbly noise has gone from when I drive on unevern roads , but the clunk accel,decell is still there , im thinking possible worn transforx box worn , read these are common on landrovers ,so to save hassle sold it cheep to save hassle , thanks guys
ifloochies
Well-Known Member
- Posts
- 866
you let go of your disco because it was too much of a hussle to sort out a clunk??!!!adaptorman
New Member
- Posts
- 143
if you,d heard it ,you,d take that comment back lol , there were other things but that's me just been fussy ,,, little happer with this other , think im finaly getting somewere with it ,,
