Td5 cruise control

M12GCD · Apr 11, 2013

Hi, I have a 03 discovery XS TD5 manual and have seen a kit on Ebay for cruise control ,it seems to consist of a switch and the controls for the side of the steering wheel. Has anyone fitted this kit and does it just "plug in and play"?

biggeeeee · Apr 11, 2013

Hi
Yes it does
It should contain steering wheel switch and dash switch but most important the metal bracket to hold the switch to the steering wheel

Easy fit and a great thing to have

darrenm · Apr 12, 2013

yes its an easy job to do about 1 hour max (30 min waiting after battery removed/ unplugged )

gavbriggs · Apr 12, 2013

I'm not sure how cruise works on manuals, the auto will change down if it encounters a bit of a hill etc, how will the manual cope with that.

Does it have a clutch switch or can you just change gear etc?

chrimcne · Apr 12, 2013

gavbriggs said:
I'm not sure how cruise works on manuals, the auto will change down if it encounters a bit of a hill etc, how will the manual cope with that.

Does it have a clutch switch or can you just change gear etc?

As soon as you depress the clutch cruise control will cut out

gavbriggs · Apr 12, 2013

Ahhhh, so you'd have to set it again. Spouse it's ok for motorways driving then.

David Pye · Apr 12, 2013

Exactly, bang it into fifth, engage cruise and go

loudandproud205 · Apr 12, 2013

You just press resume.

Clutch works the same as pressing the brakes.

Ideally the engine will rev itself up before the incline gets steep and the auto box would kick down, some times it just drags the arse out of it and and just tries to pull along with road speed dropping as it can't compensate enough.

navigator16078 · Apr 13, 2013

so is it as easy as that just plug in the switch screw it on what about the button you put in the dash tho?

biggeeeee · Apr 13, 2013

navigator16078 said:
so is it as easy as that just plug in the switch screw it on what about the button you put in the dash tho?

Remove the bottom blank on the RHS of instrument cluster, wiring should be there, plug into switch, push switch into dash....simples

Headtester · Apr 13, 2013

M12GCD said:
Hi, I have a 03 discovery XS TD5 manual and have seen a kit on Ebay for cruise control ,it seems to consist of a switch and the controls for the side of the steering wheel. Has anyone fitted this kit and does it just "plug in and play"?

I bought one from a breakers and fitted it. Quite straightforward but follow the Rave instructions on removing the airbag properly.

You need the dashboard switch, the steering wheel switch and mounting bracket. You will also need to cut the hole for the steering wheel switch - it's just the mirror image of the stereo control, a dremel makes it easier.

After that it's just plug and play, the wires for the dashboard master switch are behind the existing switch blank and the steering wheel control wires are behind the the airbag unit.

I got my parts from a breakers but they can be seen here and here and here

Hope this helps.

groenendael · Apr 13, 2013

Have a look at WWW.discovery2.co.uk/Factory Addons.

It's an excellent informative site .

M12GCD · Apr 14, 2013

Thanks for all the info. Is it easy to remove the airbag ?

biggeeeee · Apr 14, 2013

M12GCD said:
Thanks for all the info. Is it easy to remove the airbag ?

Sure is

Td5 cruise control

M12GCD

Member

biggeeeee

Retired - Living the dream

darrenm

Active Member

gavbriggs

Well-Known Member

chrimcne

Active Member

gavbriggs

Well-Known Member

David Pye

Active Member

loudandproud205

New Member

navigator16078

New Member

biggeeeee

Retired - Living the dream

Headtester

Active Member

groenendael

Active Member

M12GCD

Member

biggeeeee

Retired - Living the dream

Attachments

Similar threads