Disco 2 TD5 battery light on when running

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Andy Warren

Well-Known Member
Full Member
Posts
2,061
Location
Hertfordshire
Hi all, are the alternator brushes available separately for the Nippon Denso alternators ? I can find the diode pack but not the brushes.
Jumped into lunchtime, it started first time but the battery light came on & it only has 11.7 v across the battery when running. Thanks in advance.
 
Hi all, are the alternator brushes available separately for the Nippon Denso alternators ? I can find the diode pack but not the brushes.
Jumped into lunchtime, it started first time but the battery light came on & it only has 11.7 v across the battery when running. Thanks in advance.
Refurb guys must get them from somewhere.........;)
 
Last edited:
Got it stripped, brushes were non existent so I was hoping it would be a £10 repair as the alt. bearings were fine but once I cleaned the commutator :eek: see pics. New alternator it is :(. Thanks for all help.
Are there any recommendations for replacement/what to steer clear of?
20211015_132912.jpg
20211015_133601.jpg
 
Hi,
Just doing the same thing to the spare off my disco, had exactly the same fault and also found the commutator knackered. Found a new one on eBay quite cheap, bit of a sod to remove but cheaper than a new alternator.
Just going to try and fit the new one now.
 

Attachments

  • 16343188373003350254510940596806.jpg
    16343188373003350254510940596806.jpg
    232.1 KB · Views: 94
Hi,
Just doing the same thing to the spare off my disco, had exactly the same fault and also found the commutator knackered. Found a new one on eBay quite cheap, bit of a sod to remove but cheaper than a new alternator.
Just going to try and fit the new one now.
Do you have a link to the copper slip rings please ? I will then recon the old one . I was going to collect a new Denso alt. tomorrow but it's about a 40 mile round trip & swmbo is out all day tomorrow & with the FL off the road I've no way of getting there so I've ordered a new Hella one of the bay tonight.
 
Here it is: https://www.ebay.co.uk/itm/Alternat...2349624.m46890.l49286&mkrid=710-127635-2958-0

However, I went it fit it this evening and found it isn't exactly the same as the old one.
It's seems to be a slightly different type, with flats rather than grooves, which means you have to remove the groove on the end of the shaft, see pic.
It may be better to have another look on eBay and see if there is one that is the same. Also, I ended up destroying the old one getting it off so can't check the dimensions although the ID is perfect and the bearing still fits over the top.
 

Attachments

  • IMG_20211015_185724_616.jpg
    IMG_20211015_185724_616.jpg
    158.2 KB · Views: 94
Back
Top