td5 auto gearbox

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

landyman153

New Member
Posts
2
Good evening all hope this is the right section i am looking for a wiring diagram for a discovery td5 auto gearbox as we am planning to install a auto box coupled to a td5 engine into a defender. has anyone already done this if so do you have any pointers.

many thanks phil
 
Hmmm, the modern box is so integrated into the engine management system and extremely complex that In my view too hard. Where as the earlier ZF4HP22 with its basic hydraulic control / kick down cable is simple to understand and would make for an easier task. I once tried to read the manual for the Jaguar XJ6 4.0 with the ZF4HP22Ex box and gave up, so many sensors controlling when it changed gear from engine & gear box oil temp to outside temp and position of the accelerator pedal
 
You're in for one hell of a job. In the old days you could buy a tranny ECU called Compushift (if I remember correctly). This would run the auto box without the necessary vehicle ECU inputs and control signals. I'm fairly sure you can swap the entire valve block from the non electronic 4HP22 from a Range Rover, but that needs a cable connection to the throttle pedal to give load input into the gearbox. The TD5 has a fly by wire throttle pedal so some engineering will be required.
I suggest that you do plenty more research. It won't be an easy task.
 
You must log in or register to reply here.

Similar threads

L
Disco 2 automatic to manual conversion
Replies
0
Views
311
lizziizzil
L
D
Td5 automatic gearbox
Replies
3
Views
872
Dany
D
B
Discovery 2 TD5 R380 - Bell Housing torque
Replies
9
Views
1K
miktdish
miktdish
A
D2 autobox shudder issue (maybe)
Replies
8
Views
943
Stanleysteamer
Stanleysteamer
N
Discovery auto gerabox issues
Replies
19
Views
1K
marjon
marjon
Back
Top