TD5 90 holding back

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

land-raver

Member
Posts
11
:)Hi all
when i first pull away in my TD5 90 it seems to hold back for a few seconds before the engine picks up.Can anybody tell me what might be causing this.Any feedback appreciated.
 
Mine did exactly the same. The MAF sensor was nackered. As soon as I replaced it, it was right as rain. Make sure you buy a genuine one though, the cheap ones on ebay are useless.

If you know someone with a Nanocom, you can check it with that, just to be certain.
 
Air flow sensor every time. People fit aftermarket crap and they do not last long. The sensor is oxidising all the time. Pays to have original equipment fitted
 
Iv had a problem with my td5 90 for a while now. It'll race up to 60 no problems but then it lurches an won't go any further. It's not too much of a problem but just curious... Any ideas?
 
Got the same sort of problem, it accelerates ok up to a point then seems to lack power. If i continue to try and push it i get a bit of vibration as if the engine is lacking fuel maybe ? Going to check the fuel filter and maf sensor when i get a chance and probably the ecu connector.
 
Got the same sort of problem, it accelerates ok up to a point then seems to lack power. If i continue to try and push it i get a bit of vibration as if the engine is lacking fuel maybe ? Going to check the fuel filter and maf sensor when i get a chance and probably the ecu connector.

maf, mass air flow?
I was wondering if I could be anything to do with me snorkel because it feels like intake buzz when it lurches
 
Back
Top