td4 manual gearbox oil filler & drain plugs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I've just done mine. It was an 8mm hex key socket. Make sure you can undo the filler/level plug first, if you undo the drain plug first then can't undo the filler/level plug your in trouble.

HTH

Grayo
 
Last edited:
Is there enough room to change the gearbox oil whilst the car is on the ground?
Or do I need to be inventive and get the car up off the road?

I realise that the car must be level when refilling.
 
dog-man said:
Is there enough room to change the gearbox oil whilst the car is on the ground?
Or do I need to be inventive and get the car up off the road?

I realise that the car must be level when refilling.
Click to expand...

It's possible to change the box oil with the car on the ground.
 
Nodge68 said:
It's possible to change the box oil with the car on the ground.
Click to expand...
Hi
Just bought two front driveshafts ones definitely gone so sod it !

Any heads up regarding that job ?
And how much oil will I need to change the gearbox oil ? 56reg td4 manual 122,000
Not much history but seems well cared for and any suggestions on the oil or is just best to stick to LR oil ?
Thanks
 
and that's why we undo or try to undo the filler plug before hitting the drain. the person who got this TD4 gearbox filler plug out with a chisel and then put it back again will go to hell. or maybe it never came out. we will see once I've ordered a new one. grr.
 

Attachments

  • filler.jpg
    filler.jpg
    415 KB · Views: 314
Access is a bit tight- I’ve ordered a set of stripped hex bolt removers may do the trick, otherwise that cut in the side looks hammer/chiselable
 
Happy to say screwdriver and hammer got the turn going and got it out.

As an aside a Sealy AK54 oil syringe is the perfect tool to refill the box - would have been a nightmare without.
 

Attachments

  • 78B010CF-D792-4C30-8C65-3950982F466A.jpeg
    78B010CF-D792-4C30-8C65-3950982F466A.jpeg
    23.4 KB · Views: 172
diveandy said:
Happy to say screwdriver and hammer got the turn going and got it out.

As an aside a Sealy AK54 oil syringe is the perfect tool to refill the box - would have been a nightmare without.
Click to expand...
The oil containers usually have a pipe in the lid. If you have a larger pipe the right size you can jam it on and use that to fill the gearbox, then just swap lids when the first is empty. I have a lid in the garage somewhere with the pipe already jammed on.
 
Alibro said:
The oil containers usually have a pipe in the lid. If you have a larger pipe the right size you can jam it on and use that to fill the gearbox, then just swap lids when the first is empty. I have a lid in the garage somewhere with the pipe already jammed on.
Click to expand...

I'm going to be doing all the fluids on my FL2, now the engine is almost sorted (hopefully just an injector now). Unfortunately all the components that need oil changes, don't have drain plugs, :eek: with the exception of the gearbox. This means I have no choice but to syringe the old oil out, before I can refill with fresh. :(
 
Alibro said:
The oil containers usually have a pipe in the lid. If you have a larger pipe the right size you can jam it on and use that to fill the gearbox, then just swap lids when the first is empty. I have a lid in the garage somewhere with the pipe already jammed on.
Click to expand...

nice hack - access is pretty tight though and I wanted to make sure of the exact right amount -
4 x 400ml squirts were very satisfying ;)
 
You must log in or register to reply here.

Similar threads

C
Brake Fluid
Replies
2
Views
324
Andy Warren
Andy Warren
T
injector screw broke
Replies
0
Views
263
toto25
T
Philgt50
Rear brakes TD4
2
Replies
26
Views
883
Philgt50
Philgt50
xDParis64
Freelander 2 (LR2) Freelander 2 Clutch replacement difficulty?
Replies
5
Views
373
Hippo
Hippo
Z
Freelander 1 TD4 Automatic transmisson and shift selector
Replies
6
Views
394
Hippo
Hippo
Back
Top