Hello folks. Just an up date on my td4. I took off the hp pump and bought a service kit and serviced it by replacing the seals on all three cylinder heads. Put it back and the car started and ran ok. Then the next day it refused to start again. So I m lost. I m now beginning to think the problem is electronic. By the way I cleaned all gunk from all the air intake pipe. How do you test for injector power feed? I also suspect the performance chip might be the culprit. Any ideas?
TD4 Injector change URGENT ADVICE NEEDED PLEASE!!!
- Thread starter 03freelander
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
This car uses piezo injectors, which can't be resistance tested with any degree of accuracy.
Unless an injector has stuck open, they don't normally cause starting issues, just running issues once started. Starting issues are often due to leaking pressure regulator O rings.
AnnuvaUser
New Member
- Posts
- 3
Hi everyone my free lander 1 driver’s side electric window has opened and now won’t come back up to shut ? I press the button up and down but all I hear is the electric motor working the window won’t budge can anyone help diagnose the problem….
Hi AnnuvaUser - you’re posting in quite an old thread about injector issues… suggest you create a new post about your specific issue so everyone can see it clearly. I’m sure there will be advice forthcoming.
(Have you taken the door card off yet to have a look?
)
