TD4 Fault at 4100 rpm?

andy1989 · May 10, 2011

Hi,

I've had my Freelander TD4 since new, Its a 03 plate with 59,000 on clock. Ive just noticed when I reach 4100 rpm in each gear there is no power? Is there a limiter on each gear stopping me from going into the red zone or do I have a problem?
Anyone help?

Thanks
Andy.

badlad · May 10, 2011

andy1989 said:
Hi,

when I reach 4100 rpm in each gear there is no power?

do I have a problem?

Thanks
Andy.

Bearing in mind its a diesel landrover not a Subaru, I believe you have answered your own question:doh:

thought it was mine! · May 10, 2011

yes ther is a small problem

your forgetting to change gear

Optimus Prime · May 10, 2011

if you have a hankering to rev it into the red zone (red for a reason...) then get her up to 70, force it into 1st and drop the clutch. It'll rev well over 4100 then.

Briefly !

2.0_hippo · May 10, 2011

lol mine has never reached that RPM lol

still only sits at 3200 RPM when going 95

jedi · May 11, 2011

Thats the limit for a diesel freelander I presume. I dont bother trying to get any more that 4k rpms.

Skynet · May 12, 2011

andy1989 said:
Hi,

I've had my Freelander TD4 since new, Its a 03 plate with 59,000 on clock. Ive just noticed when I reach 4100 rpm in each gear there is no power? Is there a limiter on each gear stopping me from going into the red zone or do I have a problem?
Anyone help?

Thanks
Andy.

What the hell do ya wanna do 4000rpm for??? Jeez mate get to know the car you are driving before you kill it!!!

2.0_hippo · May 12, 2011

sounds like hes used to driving petrols

markyzs180 · May 12, 2011

andy1989 said:
I've had my Freelander TD4 since new, Its a 03 plate with 59,000 on clock

I think he's quite used to driving it....

yes andy its limited to stop you destroying the engine, most diesels are the same....

Skynet · May 12, 2011

Hang on... he's JUST noticed it????

angeloc · May 13, 2011

Skynet said:
Hang on... he's JUST noticed it????

That's what I thought - has he noticed it's a 5 speed box as well!

rhodie · Jun 1, 2011

td4 freelasnders should rev to 4800 rpm thats what the book says anyways

badlad · Jun 1, 2011

rhodie said:
td4 freelasnders should rev to 4800 rpm thats what the book says anyways

Aye and a womans place is in the Kitchen, but try and force that issue see what happens

rhodie · Jun 1, 2011

badlad said:
Aye and a womans place is in the Kitchen, but try and force that issue see what happens

i did it still hurts

Optimus Prime · Jun 1, 2011

rhodie said:
td4 freelasnders should rev to 4800 rpm thats what the book says anyways

happy to be corrected, but not sure I'd want mine revving that high !

TD4 Fault at 4100 rpm?

andy1989

New Member

badlad

Active Member

thought it was mine!

New Member

Optimus Prime

Well-Known Member

2.0_hippo

Well-Known Member

jedi

Well-Known Member

Skynet

Well-Known Member

2.0_hippo

Well-Known Member

markyzs180

Active Member

Skynet

Well-Known Member

angeloc

Well-Known Member

rhodie

Active Member

badlad

Active Member

rhodie

Active Member

Optimus Prime

Well-Known Member

Similar threads