Arctic2
Well-Known Member
- Posts
- 2,737
- Location
- Westmidlands
It was an old part of a T bar which i added a bolt through with a washer then ground it off, also some liquid metal, it worked out good i have used metal shims in the past also.
TD4 EGR Valve
- Thread starter titchfield9
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It was an old part of a T bar which i added a bolt through with a washer then ground it off, also some liquid metal, it worked out good i have used metal shims in the past also.
On diesels the MOT only tests for how much smoke it chucks out, not emissions.
Both my Td4's with disabled EGR's passed their MOT in past couple of weeks with readings below 0.3 on the opacity test, the fast pass limit being 1.5 and fail limit 3.0.
Both my Td4's with disabled EGR's passed their MOT in past couple of weeks with readings below 0.3 on the opacity test, the fast pass limit being 1.5 and fail limit 3.0.
Last edited:
titchfield9
Member
- Posts
- 74
- Location
- Forest of Dean
Thanks all, well she now has a new valve fitted so we will see Friday how she fairs on the MOT.
Must admit, she did run far better with the EGR delete on, so it may well go back on at some point.
Must admit, she did run far better with the EGR delete on, so it may well go back on at some point.
The EGR valve function isn't part of the MOT test. It's just a visual inspection, so they can see it's still fitted.
Many people simply block the vacuum pipe to it, preventing it from actually working.
Old diver
Well-Known Member
- Posts
- 432
- Location
- Dunfermline, Fife
WTF is an EGR valve!
titchfield9
Member
- Posts
- 74
- Location
- Forest of Dean
It opens under vacuum and send exhaust gas back around the turbine into the engine.
You find it on the right had side of the engine, very visible, round and has a vacuum pipe.
You find it on the right had side of the engine, very visible, round and has a vacuum pipe.
Exhaust Gas Recirculation valve. It's an emission dodad that reduces NOX emissions by feeding CO2 (from the exhaust) back into the inlet. It also fills the inlet tract with black goop, which stops the engine running properly.
