Colmhd1955
Member
- Posts
- 43
- Location
- Dublin.Ireland
How did you stop the pulley from turning to achieve the extra 90 on the nut. Mine just kept moving in the engine mounts and rising up and out. So it wouldn't catch.
Freelander 1 td4 crank pulley/ vibration damper?
- Thread starter Gaj1612
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Use the correct locking tool and wedge it against the floor, or a body component, then tighten the bolt.
Arctic2
Well-Known Member
- Posts
- 2,719
- Location
- Westmidlands
As above you need the proper locking tool.
also make sure you have the right bolt some are longer than others as the washer is different, thicker on earlier models.
Colmhd1955
Member
- Posts
- 43
- Location
- Dublin.Ireland
Great post. Thanks.
Ah there is light a the end of the tunnel............but what's with the train noises?
Ah there is light a the end of the tunnel............but what's with the train noises?
