Td4 boost pipes

Landydandytd4 · Jan 18, 2017

Upgrading the turbo and hoses on my td4 and got a silicon hose kit I have all the hoses except this one in the picture does any one have a link or the where abouts where I can get one as it's not just a simple right angle is sized differently on either end thanks in advance

guineafowl21 · Jan 18, 2017

That's not a Td4, and the right-angle hose you speak of is the same both ends. Are you sure you ahve the right kit?!

teddywood1 · Jan 18, 2017

I emailed DPH as I was concerned that on the car it is bigger on the EGR than on the plastic part it goes too they said no it the same either end so I re measured and I was right (just can not think of the size at the moment) I emailed them back say I was right they said phone the making department which I am going to do .

Landydandytd4 · Jan 18, 2017

guineafowl21 · Jan 18, 2017

Oops, lost my bearings - thought the pic was showing the EGR, not the turbo. No wonder it looked different!

I have fitted a couple of Britpart EGR elbows to friends' Freelanders and they were the same both ends - took a bit of squeezing and fiddling but I thought that was just crappy Britpart rubber.

Can't help you with the hose in the pic.

teddywood1 · Jan 18, 2017

that hose in the picture is different sizes at both ends as well I found the elbow one for the egr was a bit too big on the end where it goes onto the plastic . not the EGR end

Landydandytd4 · Jan 19, 2017

teddywood1 said:
that hose in the picture is different sizes at both ends as well I found the elbow one for the egr was a bit too big on the end where it goes onto the plastic . not the EGR end

Did you manage to get a specific pipe for yours in the end thanks Scott

Td4 boost pipes

Landydandytd4

Member

guineafowl21

Well-Known Member

teddywood1

Well-Known Member

Landydandytd4

Member

guineafowl21

Well-Known Member

teddywood1

Well-Known Member

Landydandytd4

Member

Similar threads