The TC, ABS and HDC lights came on on my TD5 discovery 2, I did know I had badly worn front rh wheel bearing so replaced complete hub with ABS sensor. The 3 lights are still on do I need to have the lights put out / reset by a dealer (I had assumed the fault would clear automaticaly on fitting the new hub / sensor) or do I have another problem ie with one of the other wheel sensors. Thanks
TC ABS and HDC warning lights on
- Thread starter Charles P
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
Hi Charles P.
You must have asked the most common question ever in relation to the Disco 2 !.
These are known as the " Three Amigos ".
If you do a search on this you will have plenty of reading !.
Del.
You must have asked the most common question ever in relation to the Disco 2 !.
These are known as the " Three Amigos ".
If you do a search on this you will have plenty of reading !.
Del.
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
search for the 'Three Amigos'
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
sierrafery
Well-Known Member
- Posts
- 17,909
- Location
- Arad/Romania
before u dig the whole forum:
1. YES.......
2. NOOOOOOOO ......there are other ways i let u find out this
thanks guys I knew about the 3 amigos I fairly sure my problem was to do with worn bearing, it was advisory at last mot and had got significantly worse over last few thousand miles, then lights went on so bit bullet and replaced hub with a replacement from 'Britpart' a lot less than gen LR. I had not realised I would need to get fault cleared for lights to go out and ABS TC to function again, I thought ECU continuously checked sensors and would clear its self with new part fitted.
Looks like I will need a visit to LR after all to put on the computer and clear fault, (Im based in Einburgh) Thanks guys
Looks like I will need a visit to LR after all to put on the computer and clear fault, (Im based in Einburgh) Thanks guys
bmp42
Active Member
- Posts
- 658
- Location
- Coimbra, Portugal
do yourself a favour and keep checking that front ****part wheel bearing regularly especialy after a journey of some distance - heat on the wheel centre
sierrafery
Well-Known Member
- Posts
- 17,909
- Location
- Arad/Romania
insist though...maybe u find a helpfull chap around with hawkeye or nanocom...and if the abs light will be on after the scan dont bother it will go off on the road
maybe u find someone here
www.discovery2.co.uk/ Nanocom Locator, get help from your Land Rover Buddies!!! i think they posted their location and contact details cos they want to help.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
maybe u find someone here
fantastic idea!
could do with one in west yorks tho!
