baptista
Active Member
- Posts
- 678
- Location
- Lisbon, Portugal
why don't you just invert wiring on the motor?
Check out post 7 on this thread
http://www.landyzone.co.uk/lz/f9/rear-tailgate-window-problem-205090.html
I know where the loom is but which colour wires need swapping.[/quote
looking at rave the green and green with red stripe should be swaped
I know OP has sorted his problem, but as its so common & this is one of the first threads to come up on google, here's a clue for new visitors:
Remove motor casing (Flattened cylindrical cover wih 2 bar magnets inside), rotate thru 180 degrees & refit. This will reverse the motor direction & sort the problem. Switch & motor now operate in the correct sense, including the short "drop" on door open & "lift" on close.
You may need to recalibrate window top/bottom stops after refitting: Wind window to top, release, hold "up" buton for 5-10 secs. Wind to bottom & hold "down" for 5-10 secss. Sorted (Well, it was on my '01 TD4 anyway)
HTH
Plugs
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!