tailgate door glass

P

para1

New Member

Posts

5

• Dec 13, 2009

• #1

I have a tailgate door with glass is in the down position. How do I get the glass off the mechanism? Do I just lever it or are there clips to undue?
PS it’s a scrap door I bought to get the winding mechanism out
ATB
Para

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

Posts

83,296

Location

Embasinga stocæ

• Dec 13, 2009

• #2

download the Rave manual.

 

Optimus Prime

Well-Known Member

Posts

5,988

Location

Garden of England

• Dec 13, 2009

• #3

the glass is held to the mechanism with 2 clamps, one either side. with the glass in the partially down position, you can see the two clamp bolts.

 

P

para1

New Member

Posts

5

• Dec 14, 2009

• #4

The Mad Hat Man said:

download the Rave manual.

Click to expand...

give me a clue from where and I will
ATB
Para

 

P

para1

New Member

Posts

5

• Dec 14, 2009

• #5

Optimus Prime said:

the glass is held to the mechanism with 2 clamps, one either side. with the glass in the partially down position, you can see the two clamp bolts.

Click to expand...

thanks onto it now
Regards
Para

 

A

AllanI

New Member

Posts

189

Location

High Peak, Derbyshire

• Dec 14, 2009

• #6

Get the trim off and look in the corners of the door. With the glass down you should be able to see the clamp set up, one each side . Undo the bolt which releases the plastic pads and withdraw the glass upwards.

Allan

Edit. Sorry I duplicated Optimus' response but for some reason the later posts didn't display until I submitted the reply. Never mind Hey.

 

Last edited: Dec 14, 2009