swing away wheel carrier non standard bumper

raymowatt@ntlworld.com · Jul 19, 2015

Hi all
I am looking to get a swing away wheel carrier for my 90, but my crossmember is non standard, its a black sheep offroad one.
I understand that one of the brackets fits in to the existing holes in the crossmember, and then you set the rest up from here, drilling holes in the body capping etc.
As my crossmember has no holes, I am not sure where I would start, and how crucial the holes need to be. I am looking at the Bearmach BA132.

Anyone had this problem

Thanks all
Ray

Empi · Jul 19, 2015

Hi my carrier locates on the bolts holding tub to cross member.
As I think they all do you should have these.

XRIZLAX · Jul 19, 2015

I've got a press brake rear cross member without any holes and a swing away wheel carrier.
If I remember correctly the top bracket is fixed through an existing rivet, ie you drill through the rivet.
Line up the top, mark out the bottom and drill the ctossmember.

lynall · Jul 20, 2015

XRIZLAX said:
I've got a press brake rear cross member without any holes and a swing away wheel carrier.
If I remember correctly the top bracket is fixed through an existing rivet, ie you drill through the rivet.
Line up the top, mark out the bottom and drill the ctossmember.

Thats exactly what I did, my carrier is the cheapie britpart one.

XRIZLAX · Jul 21, 2015

Mines a britpart cheapie, but I know how crap the paint is on sh1tparts so I galved mine one afternoon when I had newt better to do.

raymowatt@ntlworld.com · Jul 21, 2015

XRIZLAX said:
Mines a britpart cheapie, but I know how crap the paint is on sh1tparts so I galved mine one afternoon when I had newt better to do.

Hi
I don't suppose you have any pics ?
cheers
Ray

Shifty1962 · Jul 22, 2015

XRIZLAX said:
Mines a britpart cheapie, but I know how crap the paint is on sh1tparts so I galved mine one afternoon when I had newt better to do.

Where did you get your Galvy done?

XRIZLAX · Jul 23, 2015

Did it myself

if i think on, ill take a couple of pics later.

swing away wheel carrier non standard bumper

[email protected]

Active Member

Empi

Active Member

XRIZLAX

Active Member

lynall

Well-Known Member

XRIZLAX

Active Member

[email protected]

Active Member

Shifty1962

Well-Known Member

XRIZLAX

Active Member

Similar threads