Suzuki 413

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Simon

Guest
Any ideas what I should ask for my 1985 413 soft-top with solid chassis but
some rust in the usual places, and a front full bull-bar?

Alternatively what could I get if i took the bull bar off and sold it
seperately? ;)

--
Get yourself a free webmail account with <yourname> @****wit.co.uk

www.****wit.co.uk

Get yours now before all the best usernames go !!


 

"Simon" <[email protected]> wrote in message
news:[email protected]...
> Any ideas what I should ask for my 1985 413 soft-top with solid chassis
but
> some rust in the usual places, and a front full bull-bar?
>
> Alternatively what could I get if i took the bull bar off and sold it
> seperately? ;)
>
> --
> Get yourself a free webmail account with <yourname> @****wit.co.uk
>
> www.****wit.co.uk
>
> Get yours now before all the best usernames go !!
>
Is it a Samurai?
Any T&T?
£200 the lot?
£10 for the bull bar?

Simon H


 

"Simon" <[email protected]> wrote in message
news:[email protected]...
> Any ideas what I should ask for my 1985 413 soft-top with solid chassis
but
> some rust in the usual places, and a front full bull-bar?
>
> Alternatively what could I get if i took the bull bar off and sold it
> seperately? ;)
>
> --
> Get yourself a free webmail account with <yourname> @****wit.co.uk
>
> www.****wit.co.uk
>
> Get yours now before all the best usernames go !!
>
Is it a Samurai?
Any T&T?
£200 the lot?
£10 for the bull bar?

Simon H


 
Dunno if its a Samurai, its the first one I've owned and but its a 413 JLX
which apparently is an import
No t+t but wouldnt take a fortune to mot it

£200 was what I was thinking, first 200 gets it :)

Simon

--
Get yourself a free webmail account with <yourname> @****wit.co.uk

www.****wit.co.uk

/ _|_ _ ___| | ____ _(_) |_ ___ ___ _ _| | __
| |_| | | |/ __| |/ /\ \ /\ / / | __| / __/ _ \| | | | |/ /
| _| |_| | (__| < \ V V /| | |_ | (_| (_) | |_| | <
|_| \__,_|\___|_|\_\ \_/\_/ |_|\__(_)___\___(_)__,_|_|\_\


Get yours now before all the best usernames go !!

"Simon H" <[email protected]> wrote in message
news:[email protected]...
>
> "Simon" <[email protected]> wrote in message
> news:[email protected]...
> > Any ideas what I should ask for my 1985 413 soft-top with solid chassis
> but
> > some rust in the usual places, and a front full bull-bar?
> >
> > Alternatively what could I get if i took the bull bar off and sold it
> > seperately? ;)
> >
> > --
> > Get yourself a free webmail account with <yourname> @****wit.co.uk
> >
> > www.****wit.co.uk
> >
> > Get yours now before all the best usernames go !!
> >
> Is it a Samurai?
> Any T&T?
> £200 the lot?
> £10 for the bull bar?
>
> Simon H
>
>


 
On Wed, 12 May 2004 21:52:23 +0100, "Simon" <[email protected]> wrote:

->Dunno if its a Samurai, its the first one I've owned and but its a 413 JLX

Not a Samauri then a 413.

->which apparently is an import

All Suzuki's are imports ;-)






--
Geoff
www.anoraks.uk.net
 
Dunno if its a Samurai, its the first one I've owned and but its a 413 JLX
which apparently is an import
No t+t but wouldnt take a fortune to mot it

£200 was what I was thinking, first 200 gets it :)

Simon

--
Get yourself a free webmail account with <yourname> @****wit.co.uk

www.****wit.co.uk

/ _|_ _ ___| | ____ _(_) |_ ___ ___ _ _| | __
| |_| | | |/ __| |/ /\ \ /\ / / | __| / __/ _ \| | | | |/ /
| _| |_| | (__| < \ V V /| | |_ | (_| (_) | |_| | <
|_| \__,_|\___|_|\_\ \_/\_/ |_|\__(_)___\___(_)__,_|_|\_\


Get yours now before all the best usernames go !!

"Simon H" <[email protected]> wrote in message
news:[email protected]...
>
> "Simon" <[email protected]> wrote in message
> news:[email protected]...
> > Any ideas what I should ask for my 1985 413 soft-top with solid chassis
> but
> > some rust in the usual places, and a front full bull-bar?
> >
> > Alternatively what could I get if i took the bull bar off and sold it
> > seperately? ;)
> >
> > --
> > Get yourself a free webmail account with <yourname> @****wit.co.uk
> >
> > www.****wit.co.uk
> >
> > Get yours now before all the best usernames go !!
> >
> Is it a Samurai?
> Any T&T?
> £200 the lot?
> £10 for the bull bar?
>
> Simon H
>
>


 
On Wed, 12 May 2004 21:52:23 +0100, "Simon" <[email protected]> wrote:

->Dunno if its a Samurai, its the first one I've owned and but its a 413 JLX

Not a Samauri then a 413.

->which apparently is an import

All Suzuki's are imports ;-)






--
Geoff
www.anoraks.uk.net
 
Lol yeah i suppose so. Just that somebody said it was an "import" when I
priced up parts or whatever, so they sounded like it was different to the UK
spec maybe? Like I said I dunno its the first one I ever owned; but it isnt
big enough so it has to go.

--
Get yourself a free webmail account with <yourname> @****wit.co.uk

www.****wit.co.uk

/ _|_ _ ___| | ____ _(_) |_ ___ ___ _ _| | __
| |_| | | |/ __| |/ /\ \ /\ / / | __| / __/ _ \| | | | |/ /
| _| |_| | (__| < \ V V /| | |_ | (_| (_) | |_| | <
|_| \__,_|\___|_|\_\ \_/\_/ |_|\__(_)___\___(_)__,_|_|\_\


Get yours now before all the best usernames go !!

"Geoff" <[email protected]> wrote in message
news:[email protected]...
> On Wed, 12 May 2004 21:52:23 +0100, "Simon" <[email protected]> wrote:
>
> ->Dunno if its a Samurai, its the first one I've owned and but its a 413
JLX
>
> Not a Samauri then a 413.
>
> ->which apparently is an import
>
> All Suzuki's are imports ;-)
>
>
>
>
>
>
> --
> Geoff
> www.anoraks.uk.net


 
"Simon" <[email protected]> wrote in message news:<P1mqc.19$vh4.6@newsfe6-win>...
<SNIP>

but it isnt
> big enough so it has to go.
>


Well yes Simon, I know someone who wants one . . .

Usual questions - year, condition, MoT - how long, any tax, hardtop /
softtop, where is it and are there any things that need rectifying?

Tried to contact your posting address but it bounced back . . . mine
will too so please post reply and if its reasonably close I'll post
his contact details.

Thanks, Lurch
 
[email protected] (Lurch) wrote in message news:<[email protected]>...
> "Simon" <[email protected]> wrote in message news:<P1mqc.19$vh4.6@newsfe6-win>...
> <SNIP>
>
> but it isnt
> > big enough so it has to go.
> >
>
>
> Well yes Simon, I know someone who wants one . . .
>
> Usual questions - year, condition, MoT - how long, any tax, hardtop /
> softtop, where is it and are there any things that need rectifying?
>
> Tried to contact your posting address but it bounced back . . . mine
> will too so please post reply and if its reasonably close I'll post
> his contact details.
>
> Thanks, Lurch


Oh well, wonder if he really had one for sale or was just spamming for his website?

Sadly . . . . Lurch
 
F Reg, 1400cc.
>
> Removable Hardtop, 3 Previous Owners.
> 115k
> 11months MOT
> Average Condition for Year.
>
> £650.00 ONCO
>
> Now dont shoot me as it is not mine, a good friend has asked me to put it
up
> for sale. Car is based in Guidlford in Surrey, and any serious buyers may
> contact me directly
>
> igundwane_at_ntlworld.com - please remove the _at_ -
>




> Oh well, wonder if he really had one for sale or was just spamming for
his website?
>
> Sadly . . . . Lurch


 
"Igundwane" <[email protected]> wrote in message news:<Jmrtc.257$G52.7@newsfe3-gui>...
> F Reg, 1400cc.
> >
> > Removable Hardtop, 3 Previous Owners.
> > 115k
> > 11months MOT
> > Average Condition for Year.
> >
> > £650.00 ONCO
> >
> > Now dont shoot me as it is not mine, a good friend has asked me to put it
> up
> > for sale. Car is based in Guidlford in Surrey, and any serious buyers may
> > contact me directly
> >
> > igundwane_at_ntlworld.com - please remove the _at_ -



Thanks for that, regret too far away. Need a sound narrow front axle
in the Midlands / S Yorks for one I found a bit closer . . . anyone
got one they dont want?

Ta Lurch
 
On 28 May 2004 04:46:57 -0700, [email protected] (Lurch) wrote:

->"Igundwane" <[email protected]> wrote in message
news:<Jmrtc.257$G52.7@newsfe3-gui>...
->> F Reg, 1400cc.

Not a standard engine then ?

->Thanks for that, regret too far away. Need a sound narrow front axle
->in the Midlands / S Yorks for one I found a bit closer . . . anyone
->got one they dont want?

There is / was a firm in Birmingham called Suzi-Q's

I thought you were after a 410 axle, if so the 413 will fit however the diffs
and more importantly the ratios are different.


--
Geoff
www.anoraks.uk.net
 
Geoff <[email protected]> wrote in message news:<[email protected]>...
> On 28 May 2004 04:46:57 -0700, [email protected] (Lurch) wrote:
>
> ->"Igundwane" <[email protected]> wrote in message
> news:<Jmrtc.257$G52.7@newsfe3-gui>...
> ->> F Reg, 1400cc.
>
> Not a standard engine then ?
>
> ->Thanks for that, regret too far away. Need a sound narrow front axle
> ->in the Midlands / S Yorks for one I found a bit closer . . . anyone
> ->got one they dont want?
>
> There is / was a firm in Birmingham called Suzi-Q's
>
> I thought you were after a 410 axle, if so the 413 will fit however the diffs
> and more importantly the ratios are different.

Oh b*##~r . . . Thanks for warning me Geoff!! ISTR someone telling me
they were the same ratio. No, definitely need the 413 axle then
otherwise it wouldn't last long - ditto the rear! Also thanks for
your note re axle breathers, just the thing needed. Didn't spare the
jemmy after that! One day when I finally go far enough South to
actually meet you I'll buy you not one but two drinks.

Suzie Qs is a bit too pricey, mentioned a sun almost as much was paid
for the rest of the vehicle!

There's a place in Banbury called Oxygen, and a breaker in Leicester I
might try. Anyone had experience of Oxygen?

Bought a Rubbers-Suzuki front bumper recently, massive piece of kit.
A bit 'industrial' in the finish but fine in every other respect and
good value for the price on ebay. Looks good on the front of the one I
put it on too.

Lurch
 
On 28 May 2004 14:40:18 -0700, [email protected] (Lurch) wrote:

->> and more importantly the ratios are different.
->
->Oh b*##~r . . . Thanks for warning me Geoff!! ISTR someone telling me
->they were the same ratio. No, definitely need the 413 axle then
->otherwise it wouldn't last long - ditto the rear! Also thanks for
->your note re axle breathers, just the thing needed. Didn't spare the
->jemmy after that! One day when I finally go far enough South to
->actually meet you I'll buy you not one but two drinks.

Beer works for me ;-)

A matched pair of 410 or 413 axles will fit. (tho early 410's have different
props)

410 and 413 diffs are different (size and ratio)

413 diffs will fit in a Samauri however the axles are different.

->Suzie Qs is a bit too pricey, mentioned a sun almost as much was paid
->for the rest of the vehicle!

I've never dealt with them.

->There's a place in Banbury called Oxygen, and a breaker in Leicester I
->might try. Anyone had experience of Oxygen?

Nope, have you tried ebay ?

->Bought a Rubbers-Suzuki front bumper recently, massive piece of kit.
->A bit 'industrial' in the finish but fine in every other respect and
->good value for the price on ebay. Looks good on the front of the one I
->put it on too.

Rubbers pricing looks a bit steep as well !


--
Geoff
www.anoraks.uk.net
 
Lol yeah i suppose so. Just that somebody said it was an "import" when I
priced up parts or whatever, so they sounded like it was different to the UK
spec maybe? Like I said I dunno its the first one I ever owned; but it isnt
big enough so it has to go.

--
Get yourself a free webmail account with <yourname> @****wit.co.uk

www.****wit.co.uk

/ _|_ _ ___| | ____ _(_) |_ ___ ___ _ _| | __
| |_| | | |/ __| |/ /\ \ /\ / / | __| / __/ _ \| | | | |/ /
| _| |_| | (__| < \ V V /| | |_ | (_| (_) | |_| | <
|_| \__,_|\___|_|\_\ \_/\_/ |_|\__(_)___\___(_)__,_|_|\_\


Get yours now before all the best usernames go !!

"Geoff" <[email protected]> wrote in message
news:[email protected]...
> On Wed, 12 May 2004 21:52:23 +0100, "Simon" <[email protected]> wrote:
>
> ->Dunno if its a Samurai, its the first one I've owned and but its a 413
JLX
>
> Not a Samauri then a 413.
>
> ->which apparently is an import
>
> All Suzuki's are imports ;-)
>
>
>
>
>
>
> --
> Geoff
> www.anoraks.uk.net


 
Geoff <[email protected]> wrote in message One day when I finally go far enough South to
> ->actually meet you I'll buy you not one but two drinks.
>
> Beer works for me ;-)

Nice cheap tastes then! I'll have to do a 'booze cruise' and bung out
a few bottles whilst passing.


>
> A matched pair of 410 or 413 axles will fit. (tho early 410's have different
> props)

In the absence of any reasonable 413 axles in the area have been
offered a sound pair of 410 axles. The diff seems just over an inch
shorter though the prop flange seemed to be the same. Which shafts -
or neither - will be best fit? The skinny 410 ones or the fatter
413s?

Whats the difference in gearing, is it significant . . . would it be
noticeable? Doesn't really matter except for estimating actual as
opposed to indicated speed.


> ->Bought a Rubbers-Suzuki front bumper recently, massive piece of kit.
> ->A bit 'industrial' in the finish but fine in every other respect and
> ->good value for the price on ebay. Looks good on the front of the one I
> ->put it on too.
>
> Rubbers pricing looks a bit steep as well !

Taking into account free delivery and the price offered on ebay it
worked out fairly reasonable given the weight and strength of the
thing. The cost in my own time to fabricate one would be greater
before adding material and on costs.


Broke the Series 3 sometime in the last few days so got to do some
chassis welding too. Never heard it go though it had a pounding in
the woods. Only noticed when the front bumper appeared to have
developed a sag . . . Tally so far four this year!

Cheers, Lurch
 
"Simon" <[email protected]> wrote in message news:<P1mqc.19$vh4.6@newsfe6-win>...
<SNIP>

but it isnt
> big enough so it has to go.
>


Well yes Simon, I know someone who wants one . . .

Usual questions - year, condition, MoT - how long, any tax, hardtop /
softtop, where is it and are there any things that need rectifying?

Tried to contact your posting address but it bounced back . . . mine
will too so please post reply and if its reasonably close I'll post
his contact details.

Thanks, Lurch
 
On 4 Jun 2004 16:31:30 -0700, [email protected] (Lurch) wrote:

->Geoff <[email protected]> wrote in message One day when I finally
go far enough South to
->> ->actually meet you I'll buy you not one but two drinks.
->>
->> Beer works for me ;-)
->
->Nice cheap tastes then! I'll have to do a 'booze cruise' and bung out
->a few bottles whilst passing.

Just as long as its reassuringly expensive ;-)

->> A matched pair of 410 or 413 axles will fit. (tho early 410's have different
->> props)
->
->In the absence of any reasonable 413 axles in the area have been
->offered a sound pair of 410 axles. The diff seems just over an inch
->shorter though the prop flange seemed to be the same. Which shafts -
->or neither - will be best fit? The skinny 410 ones or the fatter
->413s?

Later 410 flanges are the same so you can swap them as they are, if the flanges
are different they are interchangeable, if you do pull the 1/2shafts expect to
have to change the rear wheel bearings.

->Whats the difference in gearing, is it significant . . . would it be
->noticeable? Doesn't really matter except for estimating actual as
->opposed to indicated speed.

I've always run 410 axles on my 413's as I want the lower gearing to help
compensate for the bigger tyres, you will have better acceleration but a lower
top end, how this plays out on standard tyres I have no idea as I've only ever
run 31's or 33's.



--
Geoff
www.anoraks.uk.net
 
[email protected] (Lurch) wrote in message news:<[email protected]>...
> "Simon" <[email protected]> wrote in message news:<P1mqc.19$vh4.6@newsfe6-win>...
> <SNIP>
>
> but it isnt
> > big enough so it has to go.
> >
>
>
> Well yes Simon, I know someone who wants one . . .
>
> Usual questions - year, condition, MoT - how long, any tax, hardtop /
> softtop, where is it and are there any things that need rectifying?
>
> Tried to contact your posting address but it bounced back . . . mine
> will too so please post reply and if its reasonably close I'll post
> his contact details.
>
> Thanks, Lurch


Oh well, wonder if he really had one for sale or was just spamming for his website?

Sadly . . . . Lurch
 
You must log in or register to reply here.

Similar threads

Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
3K
Goc3k
Goc3k
LOCKESBOY
My 54 Plate 4.4 vogue for 850 quid :) :(
Replies
8
Views
1K
weemac
weemac
Jamiegreen
Disco 2 Complete ACE Renewal (With Pictures) - Ongoing
Replies
19
Views
8K
Alpinejim
A
Mr S1
Defender 90 1992 'K' plated 90 200TDi Defender for sale
Replies
8
Views
4K
Mr S1
Mr S1
Mr S1
Defender 90 Defender 90 for sale
Replies
8
Views
3K
Sarbirus
S
Back
Top