suspension mot fail

Adamski88 · Oct 11, 2021

Hi, my 2004 disco 2 td5 has just failed its mot on nearside front suspension arm ball joint, can any body please tell me what this is because all I see is bushes on front suspension arm and no ball joints.
thankyou

Landmark2 · Oct 11, 2021

See here and bookmark the site
http://new.lrcat.com/#!/1232/35470/35580/2694.
Do a search on how to do them and see what fun you'll have

Griff

Interceptorxj · Oct 11, 2021

There's been a few threads recently about doing these and detailing the procedure and problems.

Stanleysteamer · Oct 11, 2021

Adamski88 said:
Hi, my 2004 disco 2 td5 has just failed its mot on nearside front suspension arm ball joint, can any body please tell me what this is because all I see is bushes on front suspension arm and no ball joints.
thankyou

Where you see F off big ball joint boots, you have F off big ball joints.
and the very best of British luck in getting them out and new ones back in.
Hell, fire and brimstone are all permitted!!!!!
Look above and below the place where the wheel swivels.

Henry_b · Oct 11, 2021

Not too difficult with the right tools.

Adamski88 · Oct 12, 2021

Stanleysteamer said:
Where you see F off big ball joint boots, you have F off big ball joints.
and the very best of British luck in getting them out and new ones back in.
Hell, fire and brimstone are all permitted!!!!!
Look above and below the place where the wheel swivels.

But that's part of the steering knuckle assembly not a suspension arm as it states on the fail certificate.

Stanleysteamer · Oct 12, 2021

Adamski88 said:
But that's part of the steering knuckle assembly not a suspension arm as it states on the fail certificate.

Well take it back to them and get them to point at it with a stick then you'll know.
But I bet we are right.

Adamski88 · Oct 12, 2021

Stanleysteamer said:
Well take it back to them and get them to point at it with a stick then you'll know.
But I bet we are right.

I bet you're right aswell, I'm going to break out the fire and remove them, but shouldn't they be a little more specific when labeling safety aspects of the vehicle? Reading back on my previous reply it wasn't worded properly, I wasn't trying to say you were wrong, more that they should be more clear. But honestly thank you for the info and knowledge.

Stanleysteamer · Oct 12, 2021

Adamski88 said:
I bet you're right aswell, I'm going to break out the fire and remove them, but shouldn't they be a little more specific when labeling safety aspects of the vehicle? Reading back on my previous reply it wasn't worded properly, I wasn't trying to say you were wrong, more that they should be more clear. But honestly thank you for the info and knowledge.

I think it is the fault of the MOT documentation, one-size-fits-all type thing. Technically I suppose you could say that anything that connects the wheels to the chassis (or body of a monocoque) is "suspension" although steering is not exactly the same. You can take some steering stuff off and the car still stays there "suspended" by its suspension.
These swivel ball joints turn, so they are part of the steering but they also hold the hub to the rest of the car and move up and down with springs and shockers, so they are part of suspension too.
You could take the AR bar off and the car would drive OK-ish. So is that part of the suspension? Most people would say it is.
Notice how in this link, they are called both steering AND suspension ball joints, depending on which advert/article you look at!
https://www.google.com/search?q=Lan...2i29i30l2.17845j0j15&sourceid=chrome&ie=UTF-8
All a bit pointless really. we both know what you mean!!!

ronsealdeath · Oct 12, 2021

Neilsen BJ press g clamp thingy is the go

suspension mot fail

Adamski88

New Member

Landmark2

Well-Known Member

Interceptorxj

Well-Known Member

Stanleysteamer

Well-Known Member

Henry_b

Think outside, no box required.

Adamski88

New Member

Stanleysteamer

Well-Known Member

Adamski88

New Member

Stanleysteamer

Well-Known Member

ronsealdeath

Sagging Member

Similar threads