Suspension lift?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

gazza1591

Active Member
Posts
335
Location
Worcester
Hi all

Currently running a gwyn Lewis challenge kit with is 2" lift, looking to get some bigger tyres on the truck may be 33" or even 35" is anyone running these size tyres? If you are how high are you lift wise? Was thinking of going a 2" body lift and +11 shocks but not sure if this would allow me to get 33" tyres in with no rubbing at articulation?
 
Ahh right thought that would be the case not sure if a 2" body lift would work on mine or not to try get 285's in with no rubbing?
 
I'm in Worcester area, and I have cut my arches and got flexi arches on but them 285's just rubbed with out going off road lol
 
I run 285's with a 4" lift (2" lift and 2" spacers) so its all suspension. I run plus 5 shocks on the rear. I also run 30mm wheel spacers and the arches are cut as far as they can be with 50mm arch extensions. I still hear them catching on the rear on a good full flex. I've no idea how ppl managed to run them with just a 2" lift, unless they don't use them offroad.
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
1K
MAF Diver
MAF Diver
N
4” lift kit td5 d2
Replies
14
Views
2K
MJI
MJI
L
2" LIFT FOR EXISTING SPRING CONVERSION
Replies
3
Views
605
Stanleysteamer
Stanleysteamer
A
Help D3 Suspension
Replies
3
Views
502
Andrew bibby
A
T
Disco 1 tyre size
Replies
3
Views
1K
300bhp/ton
300bhp/ton
Back
Top