Super winch

gozzy · Aug 11, 2012

Hi all I wondered if anyone could help me, Ihave just got myself a 2nd hand super winch 9.0 and I have connected it all up, and it's not working, it worked before I brought it, but now it has stopped, it doesn't seem to make any noise when pressing the switch forward anD backwards, the cable comes out when I turn the leaver to freel spool, but it doesn't wana move, could it be the solonoid any ideas would be great thanks

wiltshire landyman · Aug 12, 2012

solenoid could be faulty or more than likely a bad earth

auf_wiedersehen_pet · Aug 12, 2012

wiltshire landyman said:
or more than likely a bad earth

Earths are like women. They cause so much aggro - make sure they are clean and tight!

Dales · Aug 12, 2012

I had one on my old fourtrak and it was a bad earth on mine,

Is your control for the winch a remote control or cabled ?

gozzy · Aug 12, 2012

I earthed it back to the battery is that right? And it's a cabled remote

wiltshire landyman · Aug 12, 2012

gozzy said:
I earthed it back to the battery is that right? And it's a cabled remote

yep always the best way

gozzy · Aug 12, 2012

Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

Pikey · Aug 12, 2012

It's fooked???

90boy · Aug 12, 2012

gozzy said:
Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

give the motor a gentle tap with a hammer could be stuck brush's

Deasy · Aug 12, 2012

Goz come round mine Tuesday night an we will have a look pal

Paul D · Aug 12, 2012

gozzy said:
Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

Heh, don't run it any more!

As said a tap wiv' a' 'ammer sometimes works, but it might also be clogged with mud (very likely) and need a stripdown/rebuild.

Pikey · Aug 12, 2012

Hot/smoking cables = more load/current than the cables can handle. or too much resistance at some point between the battery and the motor.

So either motor is seized? or it's sticking and resisting the flow of leccy. Or it isn't earthed sufficiently. Current flowing to earth will be same as current been drawn from battery. if it can't flow then it will overheat as the resistance builds up.

I know you've earthed to battery but is the battery earth strap at least as large as the winch earth cable?? no point putting 20mm earth on the winch if the battery earth strap is only 6mm braided.

Super winch

gozzy

Active Member

wiltshire landyman

I’m back

auf_wiedersehen_pet

Well-Known Member

Dales

New Member

gozzy

Active Member

wiltshire landyman

I’m back

gozzy

Active Member

Pikey

Dummy Ejection Facilitator..

90boy

Well-Known Member

Deasy

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Pikey

Dummy Ejection Facilitator..

Similar threads