ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
it was biketeacherdave
P38A Subwoofer rebuild is it possible?
- Thread starter Henry_b
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
it was biketeacherdave
- Posts
- 12,634
- Location
- Sud ouest France !
I remember my dad's old marantz speakers when the foam went on them.
I repaired it with tyre puncture repair glue and three layers of toilet roll, I then repaired some speakers on our guitarists 4x12 cabinet using five layers. It worked a flipping treat.. but you do need the original material to take the form from... rubberised bog roll.... Flexible dude!!
I repaired it with tyre puncture repair glue and three layers of toilet roll, I then repaired some speakers on our guitarists 4x12 cabinet using five layers. It worked a flipping treat.. but you do need the original material to take the form from... rubberised bog roll.... Flexible dude!!
Last edited:
- Posts
- 3,878
- Location
- Near Heathrow.
I replace mine with two of these from eBay. Poly cones & rubber surrounds should be better suited to damp than the original paper cones.
So far they sound good although the sensitivity is lower than the HK drivers. I simply tweaked the sub woofer level on the stereo to compensate.
So far they sound good although the sensitivity is lower than the HK drivers. I simply tweaked the sub woofer level on the stereo to compensate.
