Disco 2 Strange knocking from underneath

youmitegetian · Dec 24, 2020

So I’ve found I have an odd noise when I accelerate, sort of a rattle/knock/squeal,
Thought cv joint but now I’m not sure.
In the rains last night I went out and it felt sluggish like is was struggling to turn the wheels.
This morning I tried to pull away and It will drive but getting a loud thump from underneath.
Any idea before I start crawling around in the dirt?

Stanleysteamer · Dec 24, 2020

Stuck/seized CV joint?

youmitegetian · Dec 24, 2020

I thought cv joint initially, sort of that sound but not on turning.
I did undo one end of the front prop shaft and found the UJ nearest the transfer box has a fair amount of movement, would that cause a squeal though?

Landmark2 · Dec 24, 2020

I wouild have thoght this is possible if it has no grease in it. Don't leave it too long before sorting it as you don't want it to give up whilst driving.
Griff

Stanleysteamer · Dec 24, 2020

youmitegetian said:
I thought cv joint initially, sort of that sound but not on turning.
I did undo one end of the front prop shaft and found the UJ nearest the transfer box has a fair amount of movement, would that cause a squeal though?

If a CV joint is seized, then the whole shaft, both parts and the joint will turn as one, so not like a worn CV joint which graunches on full lock.
Ah yes, the front propshafts' funny UJs do have a reputation for that, finkin about it. They shouldn't have any movement, other than that which they are supposed to have. The squeal will be caused by metal to metal contact that shouldn't be there, as the needle roller bearings should stop it. Only way to be sure would be to take the shaft off and then move all UJs through all directions to see if there is slop or tightness.
Have you tried jacking each wheel up in turn and then turning it through a full circle? That should show up any problem with a CV joint.

youmitegetian · Dec 24, 2020

Haven’t done that, the UJ definitely needs to be replaced but how do you tell if the cv is failing?

Si Click · Dec 24, 2020

If you have a CDL you could lock the diff and remove the front prop shaft. If the noise/sluggishness is gone then it was the shaft and not the CV joint.

Stanleysteamer · Dec 24, 2020

youmitegetian said:
Haven’t done that, the UJ definitely needs to be replaced but how do you tell if the cv is failing?

As the CV transfers drive from one part it is connected to to the other, at an angle, you c
Actually, as it is Christmas eve, I just found this for you
https://itstillruns.com/test-cv-joint-7776252.html
(Wifey has just bawled my ear off for being "on Landyzone on Christmas eve")

youmitegetian · Dec 25, 2020

Stanleysteamer said:
As the CV transfers drive from one part it is connected to to the other, at an angle, you c
Actually, as it is Christmas eve, I just found this for you
https://itstillruns.com/test-cv-joint-7776252.html
(Wifey has just bawled my ear off for being "on Landyzone on Christmas eve")

And now it’s Christmas Day I’m getting the same ear ache lol.
Will check tomorrow, looks easy enough to check.

youmitegetian · Dec 25, 2020

Si Click said:
If you have a CDL you could lock the diff and remove the front prop shaft. If the noise/sluggishness is gone then it was the shaft and not the CV joint.

No cdl on mine just the traction control.

Disco 2 Strange knocking from underneath

youmitegetian

Active Member

Stanleysteamer

Well-Known Member

youmitegetian

Active Member

Landmark2

Well-Known Member

Stanleysteamer

Well-Known Member

youmitegetian

Active Member

Si Click

Well-Known Member

Stanleysteamer

Well-Known Member

youmitegetian

Active Member

youmitegetian

Active Member

Similar threads