Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
As the title says.
Storm 1 / 2 engine difference anyone know
- Thread starter Ian Mackay
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
what do you want to know
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Thanks James, I have put a few posts up in different areas of the board, yours is the first reply, basically my water pump has gone, trying to buy a new one 2000 Td5, and have been told it's a Storm 1 engine, 98-2001, but water pumps on ebay say say like 98-2004, and such like need to order the correct part right now this being my daily transport.
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
never heard of 'storm1' just 10p or 15p. for my 2000 td5 i just bought a standard water pump. as far as i'm aware, the disco 2 td5 uses the same pump whatever year it is. just dont buy a cheap shìte one.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
just order pem500040g
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Thanks, looking closely at these pics, probably showing both sides
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
assuming it is a disco, if you're doing the water pump, factor in an oil change. then you can remove the pipe from the centrifugal filter to the sump, which is just 2 bolts- gives you loads more room and you have to remove both filters anyway to get at the pump.
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
it is. they are the same.
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Thanks
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you can remove centrifuge pipe from sump without draining the oil ,but an oil and filter change never goes amiss
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Just done the oil and filters last month as well when I renewed the cyl head, and new coolant, oh well.
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
i just assumed by removing it, oil would pour out as its quite low down. either way, removing it makes the water pump job a whole lot easier.
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Attachments
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
These parts I have ordered, needs to last till then 
