- Posts
- 6,152
- Location
- North Manchester
Good news. Told you it would be simples with the right diags.You will all be pleased......its all sorted..
Basically the suspension ECU had fit and got all confused thinking the rear was maxed out. My mate checked all fuses and relays....all ok, I suggested I'll put the lowest value into icarsoft suspension calibration...379....low and behold.....it lifted to off road, then lowered to standard. The suspension ECU is now not confused
Cheers guys for all your help and suggestions, it much appreciated at this end.....thanks again guys.one happy chappy now.
I take it your mate had to clear the faults before you could enter the values?
Also is it sitting at around these heights now?
but going to see if I can get air into the system by unplugging the compressor and take a live feed to it and see if I can get some air into the suspension
