Stiff gears
- Thread starter SteveT69
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Alibro
Well-Known Member
- Posts
- 7,189
- Location
- Northern Ireland
What engine? Auto or manual?
It's manual
The clutch is likely dragging. What engine is it?
I had it suggested it probably needs the clutch bleeding ,it's recently had the inner slave cylinder done a few months ago and clutch pedal seems normal ,it's really odd how the gears work only when the engines off
Td4
Alibro
Well-Known Member
- Posts
- 7,189
- Location
- Northern Ireland
Sounds like the master either needs bled, is faulty or is a cheap Aftermarket.
All the above will give your fault.
Not odd at all, it's completely normal.
If the engine is off, the gears are statutory, so the clutch isn't needed to allow the gears to shift. However if the engine is running and the clutch isn't disconnecting the engine from the box, the gears are still rotating, so they can't mesh together.
Thanks for the help ,I'll have a go at bleeding it..
Similar threads
