Stiff Clutch

Hi peeps,

I wonder if anyone would like to share some knowledge

I have just changed the clutch slave cylinder, unfortunately when I press the clutch pedal it goes down about half way then no further, I was able to bleed the system, so it only happens when I lock off the bleed nipple, any ideas?

thanks in advance

i would take the slave off again you may have an issue with the rod and release arm

ah, that makes sense, do you have any suggestions how I could test the rod and release arm once the slave is off?

many thanks for your help

rod should poke out when pushed back by 1-2cms,can you feel release arm pivoting ,rod strill on arm