sticking in and not smooth going in to gear.

Rick Davitt

New Member

Posts

8

Location

Berkshire UK

• Nov 4, 2020

• #1

Hi Chaps, thanks for the add to the Guru group of landy's, this problem is worse in the summer and after towing for a while. I'm hoping its just the gear linkage bushes are worn. I changed the clutch ~ 80 K ago its not slipping or dragging. Any ideas would be grateful. Cheers.

 

Rick Davitt

New Member

Posts

8

Location

Berkshire UK

• Nov 4, 2020

• #2

Sorry its a 1999 frelander 1 2.0 ltr diesal.

 

Kev12

Well-Known Member

Full Member

Posts

1,781

Location

Cornwall

• Nov 4, 2020

• #3

Have you had a look at the slave cylinder bracket? They are prone to flexing and bending and sometimes crack

 

Rick Davitt

New Member

Posts

8

Location

Berkshire UK

• Nov 4, 2020

• #4

I've not checked that out recently, but I did notice the poor quality bracket when I changed the clutch. I'll take a closer look and maybe make a beefier replacement unless its designed to flex for alignment.

 

brianp38dse

Well-Known Member

Posts

20,032

Location

heathrow

• Nov 4, 2020

• #5

Hello and welcome

 

Kev12

Well-Known Member

Full Member

Posts

1,781

Location

Cornwall

• Nov 4, 2020

• #6

Rick Davitt said:

I've not checked that out recently, but I did notice the poor quality bracket when I changed the clutch. I'll take a closer look and maybe make a beefier replacement unless its designed to flex for alignment.

Click to expand...

They are just flimsy

 

Rick Davitt

New Member

Posts

8

Location

Berkshire UK

• Nov 5, 2020

• #7

Cheers Kev12, I'll check it out and report my findings..

 

Hippo

Lord Hippo

Posts

53,747

• Nov 10, 2020

• #8

Welcome to the forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9