Sticking brakes

Paulmitchell1984 · Feb 11, 2015

Now then boys and girls,

every so often usually when its rained i find that my hand brake has stuck on, or at least the pads stuck to the drum.

is there anyway to stop this, iv had new drums and shoes and still does it, i cant leave handbrake of as i park on a hill and before anybody suggests it im not oiling them

C13tay1 · Feb 11, 2015

Mine used to do that .... Lubed the cables... That cured it for a while...... Eventually changed the cables and fixed for good

Chris

lenny1234 · Feb 12, 2015

Both of mine do that.

Lubed cables works a while. But they are autos so I dont use the handbrake anyway

englishbullterrier · Feb 12, 2015

I used to have a Mk1 Lotus Cortina whose clutch friction plate would bond to the flywheel if I left it for 2 weeks in the winter without declutching it.

I had to back off the bell housing and jiggle the gearbox so the first motion shaft moved the friction plate and broke the bonding.

Beat that anyone ?

lenny1234 · Feb 12, 2015

Sure. I had an very old commer highwayman that sized its clutch. I lived then on a farm with a concrete private access road.. Into first gear, start the camper and rev it up down the road. Then stamp on clutch and brakes together. Huge bang and clutch broke free...

englishbullterrier · Feb 12, 2015

Tried that, and no bloody success !

td4van · Feb 12, 2015

Could be the rear pivot points seizing - that's what it was on mine when I had the same issue

Paulmitchell1984 · Feb 13, 2015

il give them a coat of looking at then, cheers

gstuart · Feb 13, 2015

td4van said:
Could be the rear pivot points seizing - that's what it was on mine when I had the same issue

same on mine, fitted new shoes, but oiled the handbrake cable to free it off, but the pivots as u say kept sticking , cleaned and put some grease and was ok

but to be honest don't use the handbrake, just leave it in park

must replace the cables sometime,

Hippo · Feb 22, 2015

Just out of interest how do you lube the hand brake cables on a FL1?
I assume disconnect the hand brake end of the cable and tip something inside?

The Mad Hat Man · Feb 22, 2015

dribble 3in1 oil down from handbrake end - or remove and pressure feed .

teddywood1 · Feb 22, 2015

my wife's freelander used to do that same as said I changed the hand break cables and now is ok she used to have an old fiesta and every year while on holiday the clutch would seize on put it in second gear and start it up and a quick dad on the brakes and it would be free.

englishbullterrier · Feb 23, 2015

teddywood1 said:
my wife's freelander used to do that same as said I changed the hand break cables and now is ok she used to have an old fiesta and every year while on holiday the clutch would seize on put it in second gear and start it up and a quick dad on the brakes and it would be free.

Dad was useful then ?

teddywood1 · Feb 23, 2015

englishbullterrier said:
Dad was useful then ?

oooops meant dab

fredi250 · Feb 24, 2015

cables and pivots, new cables or drip feed oil into old clean and free up the pivots cover with copper ease

Sticking brakes

Paulmitchell1984

Well-Known Member

C13tay1

Active Member

lenny1234

Active Member

englishbullterrier

Active Member

lenny1234

Active Member

englishbullterrier

Active Member

td4van

Well-Known Member

Paulmitchell1984

Well-Known Member

gstuart

D3 Grandad

Hippo

Lord Hippo

The Mad Hat Man

Well-Known Member

teddywood1

Well-Known Member

englishbullterrier

Active Member

teddywood1

Well-Known Member

fredi250

Well-Known Member

Similar threads