P38A Steering wheel decals

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If you're ever up this way you can call in and do mine. Top work my man :)
It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.
 
It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.
Sounds easy but these days its even easier siting and watching other people do the work;):)
 
It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.
I hope you disconnected the battery, air bags are a right royal PIA when they throw you out the tailgate
 
Doing the decals also vastly improves your mpg. :vb-weyes:
IMG-20240511-WA0001.jpg

Never seen more than 24 knocking about.
Ps...I know they fib.
I actually saw 28.2 but the missis wasn't quick enough with the camera.
 
Back
Top