steering wheel convertion HELP?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

BOZZ

Member
Posts
50
Location
derby
hello all
i have a 1984 landrover 90 with a 36 spline steering wheel on,
i,m looking to change my steering wheel, and was wondering what would fit from other makes of vehicles as i want something smaller, but without the hassle and expence of buying a wheel and boss to convert it.

regards
bozz
 
hello all
i want something smaller, but without the hassle and expence of buying a wheel and boss to convert it.

regards
bozz

Don't be so tight & get a boss (under 30 squid). Then you can take your pick of wheels. :)

Like this beauty. The only rubbing going on is my hand on 345mm of Italian leather loveliness
luvlove.gif


LARRY002Medium.jpg


LARRY005Medium.jpg
 
Don't be so tight & get a boss (under 30 squid). Then you can take your pick of wheels. :)

Like this beauty. The only rubbing going on is my hand on 345mm of Italian leather loveliness
luvlove.gif


LARRY002Medium.jpg


LARRY005Medium.jpg

Be careful what boss you get the one i bought brought the wheel closer to me by about 3" not what you need. i cut my old wheel apart used that as a boss, bit of fabricating and a few bolts now the new wheel sits as far back as poss.
 
Be careful what boss you get the one i bought brought the wheel closer to me by about 3" not what you need. i cut my old wheel apart used that as a boss, bit of fabricating and a few bolts now the new wheel sits as far back as poss.

Mine is a bit nearer but I am thinking of getting the seat riser rails to give me a bit more leg room which should make up for it.
 
thanks chaps thats one of the reason why i,m after another wheel because iv,e fitted a set of seats out of a vectra and the landy steering wheel rubs against my legs, just been on that buyit now site and found a wheel boss for 20quid and a very nice mini steering wheel for a tenner

thanks
bozz
 
Don't be so tight & get a boss (under 30 squid). Then you can take your pick of wheels. :)

Like this beauty. The only rubbing going on is my hand on 345mm of Italian leather loveliness
luvlove.gif


LARRY002Medium.jpg


LARRY005Medium.jpg

Flat Eric - is that your fluffy lamb stuffed into the drinks holder? Do you cuddle it sweetly at night? Also - what exactly do you keep in the glass coffin box next to lamby???? Would that be weed sir?
 
Talking of steering wheels, I bought a 14" wheel and boss kit to replace my very dirty nasty looking standard wheel only to find when I installed it and went for a test run the whole landy felt as if I was driving on ice...really quite scary so I have put the old one back on.... if anyone knows of any tips on how to make a better install by doing something else please let me know.... it would be a shame to not use it as it all cost my arounf £75...

Many thanks - Jase
 
sorry to hijack the thread but i have also fitted an aftermarket wheel and boss to my 90 but the indicator stalk is miles away from the wheel now anyone got any measurments or links to a boss that will bring my wheel back closer to the stalks.
 
There is a reason Landys are fitted with that size wheel. The steering can be really heavy with a smaller one. I would get a newer landrover wheel off e bay 2007 - 10 puma wheels are 36 spline and TD5s.. from about £30
 
Flat Eric - is that your fluffy lamb stuffed into the drinks holder? Do you cuddle it sweetly at night? Also - what exactly do you keep in the glass coffin box next to lamby???? Would that be weed sir?

:D That's between me and my lamby. My lips are sealed. ;)

Sorry to disappoint but my stash is mints with the less fattening centres.
 
Back
Top