Steering box recon

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chrisstdt

chrisstdt

Well-Known Member
Posts
923
Location
scottish borders
The steering box on my defender is leaking

Can anyone e recommend a reputable company that will sell me me properly rebuilt unit

I replaced the box on my lightweight coiler a few years ago with a rebuilt unit off ebay and it leaked within a month!

Thanks
 
No but you could try a seal kit if it leaks from the lower output shaft. Did my son's 7 or so years ago and have just redone it recently, not to bad.
 
I can try changing the seal ,I always assumed they leak there as the shaft is pitted / scored

(I also assume that's why the last rebuilt box I bought leaked)

Worth a shot as the seal is cheap
 
Seen a post on here about using a speedy sleeve? or something.
Maybe they will see this and give more info. Gives a new surface for a new seal to run on, surprised its not talked about more considering the problems we have with output shaft leakage.
 
Flossie said:
Seen a post on here about using a speedy sleeve? or something.
Maybe they will see this and give more info. Gives a new surface for a new seal to run on, surprised its not talked about more considering the problems we have with output shaft leakage.
Click to expand...
I've done it on my RRC one.
It was quite a while ago & - so far - no leaks.
Used them on other things incl the crank pulley.

There was a very good 'how to' done by someone which I followed which gave the size of speedisleeve you need but unfortunately it disappeared when the photobucket started charging people a subscription for storage

Can be done without stripping the box, but it's much easier if you take the box off the car & do it on the bench/in a big vice.
Measure the depth of the old seal before removing it then remove it, fit the sleeve & the new seal kit.
You don't need to peel the lip off the sleeve, I didn't, but you need to seat to depth to take that into account.
You will need a length of tube as the fitting thing that comes with the sleeve isn't long enough.

Found this on another site & it links to the old LRO forum and a post by dieseldog who did it by stripping the box. Photos don't work, but it gives the size:
 
Last edited:
I read the neg reviews for one of the cheapy ebay sellers and he sends out copy cheap stuff even though the pic shows a top brand.
 
They are a proper steering company and you can talk to them and if you’re local call in!
I had a chat with them before I went head….
Good luck!
 
You must log in or register to reply here.

Similar threads

AH-4x4
Steering Box Leaks (NTC1582)
Replies
7
Views
434
Rangieman123
Rangieman123
chrisstdt
Steering box fault
Replies
2
Views
880
chrisstdt
chrisstdt
H
Recommend Recon engine supplier 3.0 sdv6
Replies
11
Views
1K
Hedge cutter
H
F
Power Steering Box.
Replies
7
Views
800
Fortunastephen
F
1
Transfer Box change 1.4 to 1.2
2
Replies
25
Views
3K
Brown
Brown
Back
Top