Adam1979
New Member
- Posts
- 497
- Location
- South Wales
Having intermittent trouble with my 300TDi starter motor (again) which sometimes just clicks but the starter does not engage. I have been told to bypass the solenoid by putting a lead straight from the battery to find out if this is at fault. Do I just run a jump lead from the positive terminal on the battery to the point on the solenoid that the other three wires are connected too?? There is one little thin wore connected to a spade connection (trigger wire??) and then three cables bolted to another connection - I presume it is this one I need to place the wire from the battery??
Cheers (again!!)
Cheers (again!!)