plastic soul
Active Member
- Posts
- 432
I want to fit some spots, I already have the ES spoiler fog lights, can I wire some spots up to these?
spotlights connection
- Thread starter plastic soul
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
Not unless you want to overload the wiring (and have them working as fog lights).
Use a relay triggered by main beam with a new feed.
Critical Mick
Member
- Posts
- 85
- Location
- Newcastle upon Tyne
You could take a feed from the fog lights and use it to trigger a relay. But I would agree with AWP, it would be better to use main beam to trigger the relay instead.
I circumcised my bumper to increase the approach angle and used the foglight switch to switch on a pair of 8" 100 watt driving lamps (via a relay of course). I also have a pair of 6" ones that come on with main beam.
I circumcised my bumper to increase the approach angle and used the foglight switch to switch on a pair of 8" 100 watt driving lamps (via a relay of course). I also have a pair of 6" ones that come on with main beam.
plastic soul
Active Member
- Posts
- 432
do you mean main beam as in high beam?
Circumsise meaning you lopped the bottom trim off?
Circumsise meaning you lopped the bottom trim off?
Critical Mick
Member
- Posts
- 85
- Location
- Newcastle upon Tyne
Yep high beam
Before the circumcision:-
After giving it the chop:-
And after adding the lights:-
Before the circumcision:-
After giving it the chop:-
And after adding the lights:-
discool
Well-Known Member
- Posts
- 13,704
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Not for foglights
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
discool
Well-Known Member
- Posts
- 13,704
I missed that bit , who would trigger spot/driving lights from a fog light circuit ?.
plastic soul
Active Member
- Posts
- 432
I'm liking that, so if there is fog, you don't bother with anything?
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
The fog light circuit and main beam need to be totally seperate. One shouldn't activate the other.
Similar threads
